Professional Workstation 5000

Configuring System Board

System Board Jumper Battery E1
Jumper
Setting
 Function Description
E1
1-4 
 Battery  External battery connection
5-6 
 Battery  External battery jumper
6-7 
 Battery  Internal battery jumper (default)
Top of Page

System Board Jumpers

Switch Block SW1
S1- Setup Password
S2 - CPU Bus Frequency
S3 to S6 - Bus/CPU Core Frequency Ratio 
SW1 Switch Settings (S1) Setup Password
S1 Setup Password
OFF Enabled
ON Disabled
SW1 Switch Settings (S2) CPU Bus Frequency
S2 CPU Bus Frequency
OFF 60 MHz
ON 66 MHz
SW1 Switch Settings (S3-S6) Bus/CPU Core Frequency Ratio
S3 S4 S5 S6 Bus/CPU Core Frequency Ratio
ON ON ON  ON 2/4
ON ON ON  OFF 2/5
ON ON OFF  ON 2/6(Default)
ON ON OFF  OFF 2/7
ON OFF ON  ON 2/8
ON OFF ON  OFF 2/9
ON OFF OFF  ON 2/10
ON OFF OFF  OFF 2/11
For 200MHz set S3, S4, S6 to ON and S5 to OFF. 
Top of Page

System Board Components

  
1. Network Interface Controller
2. Ultra-Wide SCSI Controller
3. Memory Module (DIMM) Sockets
4. Voltage Regulator (Primary)
5. Processor (Primary or Processor 0)
6. Voltage Regulator (Secondary)
7. Processor (Secondary or Processor 1)
8. Audio Controller 
Top of Page

Expansion Board

  
Expansion Slots

1. One PCI/ISA (Peripheral Component Interconnect) shared expansion slot
2. Three PCI (Peripheral Component Interconnect) expansion slots
3. One ISA (Industry Standard Architecture) expansion slot 
Top of Page

This page was updated on June 20, 2002
Comments about this page
Privacy and Legal Statement