************************************************************
************************************************************
*
* Intel(R) 815 Chipset Family Graphics Driver for
* Microsoft* Windows* 98 and Microsoft* Windows* 95 OSR 2.1
* or later Installation Information
*
* NOTE: This document refers to systems containing the
* following Intel chipsets:
*
* Intel(R) 815 chipset
* Intel(R) 815E chipset
*
* Date: June 12, 2000
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
************************************************************
Intel is making no claims of usability, efficacy or warranty.
The INTEL SOFTWARE LICENSE AGREEMENT contained herein
completely defines the license and use of this software.
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. System Requirements
2. Localized Language Abbreviations
3. Installing the Software
4. Verifying Installation of the Software
5. Identifying the Software Version Number
6. Uninstalling the Software
************************************************************
* 1. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain one of the following Intel
chipsets:
Intel(R) 815 chipset
Intel(R) 815E chipset
2. The software should be installed on systems with at
least 32 MB of system memory.
3. There should be sufficient hard disk space in the <TEMP>
directory (typically C:\WINDOWS\TEMP or C:\TEMP) on the
system in order to install this software.
The Microsoft Windows 95 INF files included with this
distribution package are designed to function with the
following versions of Microsoft Windows 95:
Microsoft Windows 95 4.00.950B (OSR2.1 with USB
Supplement)
Microsoft Windows 95 4.00.950C (OSR2.5 with or without
USB Supplement)
The Microsoft Windows 98 INF files included with this
distribution package are designed to function with the
following version of Microsoft Windows 98:
Microsoft Windows 98 4.10.1998
Microsoft Windows 98 SE 4.10.2222
Please check with your system provider to determine the
operating system and Intel chipset used in your system.
************************************************************
* 2. LOCALIZED LANGUAGE ABBREVIATIONS
************************************************************
The following list contains the abbreviations of all
languages into which the driver has been localized. You may
have to refer to this section while using this document.
ptb -> Brazilian Portuguese
dan -> Danish
nld -> Dutch
enu -> English
fin -> Finnish
fra -> French
frc -> French Canadian
deu -> German
ita -> Italian
eng -> International English
jpn -> Japanese
kor -> Korean
chs -> Mainland Chinese
plk -> Polish
ptg -> Portuguese
cht -> Traditional Chinese
nor -> Norwegian
rus -> Russian
esp -> Spanish
sve -> Swedish
tha -> Thai
************************************************************
* 3. INSTALLING AND EXECUTING THE SOFTWARE
************************************************************
General Installation Notes:
1. The operating system must be installed prior to the
installation of the driver.
2. This installation procedure is specific only to the
version of driver and installation file included in this
release.
3. You can choose six different methods of installation for
this release. The files that must be downloaded for each
are indicated in the appropriate section.
1) InstallShield* (automated) install from CD-ROM
See Section 3.1.
2) InstallShield* (automated) install from web download
See Section 3.1.
3) InstallShield* (automated) install from floppy disk
See Section 3.2.
4) Manual install from hard drive
See Section 3.3.
5) Manual install from CD-ROM
see Section 3.3.
6) Manual install from floppy disk
See Section 3.4.
3.1 INSTALLSHIELD (AUTOMATED) INSTALL FROM CD-ROM or WEB DOWNLOAD
1. To install from a CD, insert the CD-ROM. If autorun is
enabled, the installer will begin automatically. Otherwise,
enter the graphics directory on the CD-ROM and double-click
SETUP.EXE. Continue on to step 3.
2. To install from a Web download, you will download either a
ZIP file or an EXE file from the Intel(R) Website.
a. If it is an EXE file, double-click the file you downloaded
and the installation will begin automatically. Continue on
to step 3.
b. If it is a ZIP file, you must unzip it using a utility such
as WinZip* or PKZip*, then enter the directory into which
you unzipped the files. Enter the graphics subdirectory
and double-click SETUP.EXE. Continue on to step 3.
3. Click "Next" on the Welcome screen.
4. Read the license agreement and click "Yes" to continue.
5. This screen indicates the directory in which the End-User
Diagnostic (EUD) utility files will be stored.
NOTE: The graphics driver is not installed here. (It is
installed in the appropriate Windows system directories.)
Only the EUD utility files are installed here. If you wish
to change the directory in which the EUD will be stored,
click "Browse" and change the directory. Click "Next" to
continue.
6. The driver files will now be installed. When the install
finishes, choose the "Yes" to reboot option, and click
"Finish" to restart your computer. The driver should
now be loaded. To determine if the driver has been loaded
correctly, refer to the "Verifying Installation" section
below.
3.2 INSTALLSHIELD (AUTOMATED) INSTALL FROM FLOPPY DISK
1. Floppy disk install is broken down by language, so you need
to download the correct file from the Web for the driver
language needed. File names are in the format WIN9Xxxx.ZIP,
where xxx is the three-letter abbreviation of the desired
language. (See Section 2, Localized Language Abbreviations).
2. After downloading the correct ZIP file from the Web, you
must unzip it using a utility such as WinZip* or PKZip*.
3. The files will unzip into multiple subdirectories, each
labeled for its own disk. Copy the contents of these
directories to their corresponding floppy disks.
4. Insert floppy 1 into the disk drive. Go to the floppy
directory and double-click on setup.exe.
5. Click "Next" on the introduction screen.
6. Read the license agreement and click "Yes" to continue.
7. This screen indicates the directory into which the End-User
Diagnostic files will be stored. If you wish to change this
directory, click "Browse" and change the directory. Click
"Next" to continue.
8. The driver files will be copied from the floppy. Insert
the remaining floppies as directed and click "OK".
9. When finished, click "Yes" to restart your computer. The
driver should now be loaded. To determine if the driver has
been loaded correctly, refer to the Verifying Installation
section below.
3.3 MANUAL INSTALL FROM CD-ROM OR HARD DRIVE
1. Download WIN9XCD.ZIP from the Web. You must unzip it using
a utility such as WinZip* or PKZip*. Transfer the files to
a CD if you wish to install from the CD-ROM.
2. Select the My Computer icon, the Control Panel icon, and
then the Display icon.
3. You should now be in the Display Properties window.
Select the Settings tab, and click on the Advanced
Properties button.
4. In the Advanced Display Properties window, select the
Adapter tab, and click the Change... button.
5. The Update Device Driver Wizard window appears.
Click on the Next button to continue.
6. A new window appears, prompting either for Windows to
search for a device driver or for manual selection. Click
the following option: "Display a list of all the drivers in
a specific location, so you can select the driver you want."
After this, click on the Next button.
7. From the new window, click on the Have Disk button and
then the Browse button.
8. Enter the directory where you unzipped WIN9XCD.ZIP and
then enter the Graphics subdirectory. Next enter the
Win9X subdirectory. If you wish to install the English
version of the driver, simply click "OK". (The
I81xw9x.inf file should be highlighted.) If you wish to
install a localized driver file, next enter the Inf
subdirectory (from the Graphics subdirectory), and then
enter the directory for the language you wish to install.
(See Section 2, Localized Language Abbreviations.)
At this point, the i81xw9x.inf file should be highlighted.
Click "OK".
9. Click "OK". The Select Device screen should open and it
may have two options to choose from. (Some systems may have
only one.) Select the display adapter that your system
contains. Click "OK".
10. Click "Next". The driver should install. Click "Finish"
when done.
11. Close all open windows and click "Yes" to reboot. The
driver should now be loaded. To determine if the driver has
been loaded correctly, refer to the Verifying Installation
section below.
3.4 MANUAL INSTALL FROM FLOPPY DISK
1. The floppy disk install is broken down by language, so you
need to download the correct file from the Web for the driver
language needed. File names are of the format WIN9Xxxx, where
xxx is the three-letter abbreviation of the desired language.
(See Section 2, Localized Language Abbreviations.)
2. Once you have downloaded the correct file from the Web,
double-click to unzip it. (You must have WinZip installed;
download it from www.winzip.com). Hit the Extract button
and indicate the directory into which the files are to be
extracted. Hit the Extract button to unzip the files to
that directory.
3. The files will unzip into multiple subdirectories labeled
accordingly. Copy the contents of these directories
to their corresponding floppy disks.
4. Select the My Computer icon, the Control Panel icon, and
then the Display icon.
5. You should now be in the Display Properties window.
Select the Settings tab, and click on the Advanced
Properties button.
6. In the Advanced Display Properties window, select the
Adapter tab, and click the Change... button.
7. The Update Device Driver Wizard window appears.
Click on the Next button to continue.
8. A new window appears, prompting either for Windows to
search for a device driver or for manual selection. Click
the following option: "Display a list of all the drivers
in a specific location, so you can select the driver you
want." After this, click on the Next button.
9. From the new window, click on the Have Disk button and
then the Browse button.
10. Click "OK". The Select Device screen should open and
may have two options to choose from. (Some systems may have
only one). Select the display adapter that your system
contains. Click "OK".
11. Click "Next". Follow any prompts for additional floppy
disks to be inserted. The driver should then install. Click
"Finish" when done.
12. Close all open windows and click "Yes" to reboot. The
driver should now be loaded. To determine if the driver has
been loaded correctly, refer to the Verifying Installation
section below.
************************************************************
* 4. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1. From the Microsoft Windows 95 or Microsoft Windows 98 desktop,
click on "My Computer", "Control Panel", and then "System".
2. You should be in the System Properties window. Click
on the Device Manager tab. From here, go down to "Display
Adapter" and click. The Intel(R) 81X chipset series graphics
driver should be listed. If not, the driver is not
installed correctly. To check the version of the driver,
refer to the section below.
************************************************************
* 5. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
1. Select the My Computer icon, the Control Panel icon, and
then the Display icon.
2. You should now be in the Display Properties window.
Select the Settings tab and click the Advanced button.
3. Select the Version tab. The entry for the Display
Driver Version should be the appropriate version number.
If not, then a different driver is being used.
************************************************************
* 6. UNINSTALLING THE SOFTWARE
************************************************************
NOTE: This procedure assumes that the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation file
included in this package.
1. From the Microsoft Windows 95 or Microsoft Windows 98 desktop,
click on "My Computer", "Control Panel", and then "Display".
2. You should be in the Display Properties window. Click
on the Settings tab. Next click the Advanced button.
3. Select the Adapter tab. The driver information will
appear. Click on the Change button.
4. The Update Device Driver Wizard window should open.
Click "Next".
5. In the next window, select the "Display a list" option
and click the Next button. Next click on "Show all
hardware".
6. In the split screen window under "Manufacturers:", select
"(Standard display types)". In the other half of the split
window, select "Standard PCI Graphics Adapter (VGA)", then
click on the Next button.
7. On the next screen, hit "Next". If needed, direct
Windows to the location of your Microsoft Windows 95 or
Microsoft Windows 98 installation CD-ROM. The VGA driver
should be loaded.
Click on "Finish" and reboot the system as directed,
in order for the changes to take effect.
8. To verify that the VGA driver was installed correctly,
refer to Section 4 and look for "Standard PCI Graphics
Adapter (VGA)," instead of the Intel(R) 81X chipset series
graphics driver.
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
* (OEM / IHV / ISV Distribution & Single User)
************************************************************
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
Please Also Note:
* If you are an Original Equipment Manufacturer (OEM),
Independent Hardware Vendor (IHV), or Independent Software
Vendor (ISV), this complete LICENCE AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL
SOFTWARE LICENCE AGREEMENT, applies.
For OEMs, IHVs, and ISVs:
LICENCE. This Software is licenced for use only in
conjunction with Intel component products. Use of the
Software in conjunction with non-Intel component products is
not licenced hereunder. Subject to the terms of this
Agreement, Intel grants to You a non-exclusive,
non-transferable, world-wide, fully paid-up licence under
Intel's copyrights to:
a) use, modify and copy Software internally for Your
own development and maintenance purposes; and
b) modify, copy and distribute Software, including
derivative works of the Software, to Your end-users, but
only under a licence agreement with terms at least as
restrictive as those contained in Intel's Final, Single User
Licence Agreement, attached as Exhibit A; and
c) modify, copy and distribute the end-user
documentation which may accompany the Software, but only in
association with the Software.
If You are not the final manufacturer or vendor of a
computer system or software program incorporating the
Software, then You may transfer a copy of the Software,
including derivative works of the Software (and related
end-user documentation) to Your recipient for use in
accordance with the terms of this Agreement, provided such
recipient agrees to be fully bound by the terms hereof. You
shall not otherwise assign, sublicence, lease, or in any
other way transfer or disclose Software to any third party.
You shall not reverse-compile, disassemble or otherwise
reverse-engineer the Software.
Except as expressly stated in this Agreement, no licence or
right is granted to You directly or by implication,
inducement, estoppel or otherwise. Intel shall have the
right to inspect or have an independent auditor inspect Your
relevant records to verify Your compliance with the terms
and conditions of this Agreement.
CONFIDENTIALITY. If You wish to have a third party
consultant or subcontractor ("Contractor") perform work on
Your behalf which involves access to or use of Software, You
shall obtain a written confidentiality agreement from the
Contractor which contains terms and obligations with respect
to access to or use of Software no less restrictive than
those set forth in this Agreement and excluding any
distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of
this Agreement or use Intel's name in any publications,
advertisements, or other announcements without Intel's prior
written consent. You do not have any rights to use any
Intel trademarks or logos.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of
the Software remains with Intel or its suppliers. The
Software is subject to copyright and protected by the laws
of the United States and other countries, and international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time and without
notice, but is not obligated to support or update the
Software. Except as otherwise expressly provided, Intel
grants no express or implied right under Intel patents,
copyrights, trademarks, or other intellectual property
rights. You may transfer the Software only if the recipient
agrees to be fully bound by these terms and if you retain no
copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material physical defects for a period of ninety
(90) days after delivery by Intel. If such a defect is
found, return the media to Intel for replacement or
alternate delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE
SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorised representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with
"RESTRICTED RIGHTS." Use, duplication, or disclosure by the
Government is subject to restrictions as set forth in
FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgement of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
EXHIBIT "A"
INTEL SOFTWARE LICENCE AGREEMENT (Final, Single User)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
LICENCE. You may copy the Software onto a single computer
for your personal, non-commercial use, and you may make one
back-up copy of the Software, subject to these conditions:
1. This Software is licenced for use only in conjunction
with Intel component products. Use of the Software in
conjunction with non-Intel component products is not
licenced hereunder.
2. You may not copy, modify, rent, sell, distribute or
transfer any part of the Software except as provided in this
Agreement, and you agree to prevent unauthorised copying of
the Software.
3. You may not reverse engineer, decompile, or disassemble
the Software.
4. You may not sublicence or permit simultaneous use of the
Software by more than one user.
5. The Software may contain the software or other property
of third party suppliers, some of which may be identified
in, and licenced in accordance with, any enclosed
"licence.txt" file or other text or file.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of
the Software remains with Intel or its suppliers. The
Software is subject to copyright and protected by the laws
of the United States and other countries, and international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time without notice,
but is not obligated to support or update the Software.
Except as otherwise expressly provided, Intel grants no
express or implied right under Intel patents, copyrights,
trademarks, or other intellectual property rights. You may
transfer the Software only if the recipient agrees to be
fully bound by these terms and if you retain no copies of
the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material physical defects for a period of ninety
(90) days after delivery by Intel. If such a defect is
found, return the media to Intel for replacement or
alternate delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE
SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
WARRANTY OF ANY KIND INCLUDING WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorised representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with
"RESTRICTED RIGHTS." Use, duplication, or disclosure by the
Government is subject to restrictions as set forth in
FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgement of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
SLAOEMISV1/RBK/01-21-00
************************************************************
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or warranty.
The INTEL SOFTWARE LICENSE AGREEMENT contained herein
completely defines the license and use of this software.
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life-sustaining applications.
************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) Intel Corporation, 1998-2000