TN810 Release Note - Version PH8.04.TN810.04

BIOS Installation Instructions

If the board has a working bootbloc.	Disconnect AC, Insert Recovery Floppy, Reconnect AC and Turn On. Wait for some time (or steady postcode 28)
If board boots from floppy.	Boot from Recovery Floppy. Wait for steady DOS prompt.
If FWH is socketed.	Program BIOS into FW4 and replace.

Changes since Previous Release

APM 1.2 now functional
System bus and CPU frequencies now displayed on advanced menu in setup
Support for upto 6 PCI slots in setup (set by manufacturing flags)
Added 0.23 version (PV 1.0) of video oprom
Add setup options for onboard LAN
Firmware Hub device node added for Intel security driver
IPR011019 CPU Microcode can now be updated at run time
IPR011011 Redundant floppy options removed from help text
IPR011010 Redundant IDE options removed from help text
IPR011009 Cylinder/Head/Sector displays removed from setup
IPR011006 and 011007 Date is no longer altered when UK language selected
IPR011003 Misleading options in setup changed
IPR010997 CPU and front fans turn off in standby
IPR010985 Setup text no longer disappears
IPR010972 Help text for After Power Fail option changed

Known problems/omissions

No ACPI support
No support for DMI/SMBIOS
No wake up support except from power button
No Alert on LAN
No legacy USB support
No support for chassis intrusion security
LAN bios is not final
Video bios is not final
No support for keyboardless operation (except in Manufacturing mode)