MP060 USER'S MANUAL
                     ALi 486DX PCI/ISA MOTHERBOARD



Foreword
========
This manual is designed to provide the basic necessarv information for the end user
to understand and properly use the MP060 mainboard. The mainboard ensures
superlative performance and complete compatibility with industry standards, which
incorporating many technical enhancements.


Trademarks
==========
WTC is a registered trademark of Win Technologies Co., Ltd. All trademarks
belong to their registered owner.


Checklist
=========
Your MP060 Cache package contains the following:

* MP060 Cache mainboard
* User's Manual.
* HDD Cable
* FDD Cable
* Serial & Printer Cable


Precautions
===========
Make sure you ground yourself before handling the mainboard or other
system components. Electrostatic discharge will damage mainboard.Note
that you must take special precaution when handling the mainboard in
dry or air-conditioned environments.

The precaution below is to protect the mainboard from electrostatic discharge.
* Do not remove the anti-static packaging until you are ready to install the mainboard
 and other system components.
* Ground vourselfbefore removing any system component from its protective anti-
 static packaging. To ground yourself , grasp the expansion slot covers or other
 unpainted portion computer chassis.
* Frequently ground yourself while working , or use a grounding strap.
* Handle the mainboard by the edges and avoid touching its components.


Mainboard Features
==================
* ALI chipset M1487 and M1489
* Support Intel, AMD, Cyrix CPU
+ Support EDO DRAM , Symmetrical and Asymmetrical DRAM
* Memory expandable upto 128MB
* External Cache option 128KB , 256KB and 512KB
* Onboard'FDC , Serial port and Normal / ECP / EPP Parallel port
* Support Four 16bit slot and Four PCI slot ( 3 Master and 1 Slave )
+ Support deep green SMM and SMI
+ Chipset built in keyboard controller
* Dimension : 22 x 22 cm with 4 layer PCB


Jumper and Connectors Reference
===============================
Before installing the mainboard, make sure that the jumper setting are properly set
for your configuration. The function of differentjumpers are respectively as follows:

CPU Type Configuration.................... JP19, JP20, JP22, JP23, JP24,
                                           JP25, JP26, JP27,JP28,JP29
CPU Clock Configuration .................. JP5, JP6
CPU Voltage Configuration................. JP13, JP14, JP16
Cache Conftguration ...................... JP15, JP17
CMOS Charge/ Discharge ................... J1
UO Chip Configuration .................... JP31
Flash ROM Voltage Configuration .......... JP8

Matnboard Connectors
====================
Turbo Switch Connector ................... J3
Turbo LED Connector ...................... J4
Reset Switch Connector.................... J2
Speaker Connector ........................ J6
Keylock and Power LED Connector........... J5
Keyboard Connector ....................... KB1
Power Supply Connector ................... P1/P2
External Battery Connector ............... J1
SMI Switch Connector ..................... JP21

Jumper Caps reference :
Red           Jumper for           Voltage Selector
White         Jumper for           CPU Type
Yellow        Jumper for           Clock Selector
Blue          Jumper for           Cache Option
Black         Jumper for           Other


Before turning on your power supply, make sure that the following configuration are
set properly.

A. CPU TYPE CONFIGURATION
  CPU type configuration will give you detailed information to install the jumper
  setting of different type of CPU. If the CPU type you are using is not listed in our
  user's manual , please contact your dealer for the correct jumper setting.

B. CPU CI,OCK CONFIGURATION
  CPU Clock configuration will give you detailed information to install the jumper
  setting of different types of CPU Clock frequency.

C. CPU VOLTAGE CONFIGURATION
  CPU Voltage Configuration will give you detailed information to install the jumper
  setting of different types of CPU Voltage.


CPU JUMPER SETTING
==================

Graphic reference:  **	 with jumer cap (close)
		    OO	 without jumper cap (open)

INTEL CPU
=========

DX2/DX4:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
OOO	O**	*O	OO	O*O	*O	OO	O**
OOO	**O	*O	**	O*O	*O	OO
	JP23		JP25


WRITE BACK CPU:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
OO*	O**	*O	OO	O*O	*O	O*	O**
OO*	O**	*O	**	O*O	*O	O*
	JP23		JP25

CPU CLOKC:	JP6 CLOSE
		JP5 CLOSE



AMD CPU
=======

DX2-80:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
O*O	O**	*O	**	O*O	*O	OO	O**
O*O	**O	*O	**	O*O	*O	OO
	JP23		JP25

NV8T DX4-100/120:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
OO*	O**	*O	OO	O*O	*O	OO	O**
OO*	**O	*O	**	O*O	*O	OO
	JP23		JP25

SV8B DX4-100/120:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
OO*	O**	*O	OO	O*O	*O	O*	O**
OO*	O**	*O	**	O*O	*O	O*
	JP23		JP25

5X86-P75:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
O**	O**	*O	OO	O*O	*O	O*	O**
O**	O**	*O	**	O*O	*O	O*
	JP23		JP25

AMD CPU CLOCK:			JP5	JP6
		DX4-100		CLOSE	CLOSE
		5X86-P75	CLOSE	CLOSE
		DX2-80/DX4-120	OPEN	CLOSE


CYRIX CPU
=========

DX2-66/DX4-100:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
*OO	O**	O*	OO	OO*	O*	*O	O**
*OO	**O	O*	**	OO*	O*	*O
	JP23		JP25

CX586-100:
JP22	JP19	JP24	JP20	JP26	JP27	JP28	JP29
OO*	O**	*O	OO	O*O	*O	O*	O**
OO*	**O	*O	**	O*O	*O	O*
	JP23		JP25


CYRIX CPU CLOCK:		JP5	JP6
		DX2-66/DX4-100	CLOSE	CLOSE
		CX586-100	CLOSE	CLOSE
		DX2-80		OPEN	CLOSE


CPU VOLTAGE
===========
			JP13	JP14	JP16
			OOO	O**	O**
		5V	OOO

		3.3V	OO*	**O	**O
			OO*

		3.45V	O*O	**O	**O
			O*O

		4.0 V	*OO	**O	**O
			*OO	


SRAM Configuration
==================
Cache Configuration is used to configure the external cache of the
mainboard.External cache can be configured by using 32K*8 , 64K*8 and 128K*8
SRAM Chip.The size of the external cache is configured by the SRAM chip being
used and the jumper setting of the Cache Configuration.

		JP15	JP17	SRAM	TAG RAM

128K CACHE	OPEN	2-3	32K*8	8K*8

256K CACHE(1)	1-2	1-2	64K*8	16K*8

256K CACHE(2)	2-3	1-2	64K*8	16K*8

512K CACHE	1-2,3-4	1-2	128K*8	32K*8


Memory Configuration
====================
Mainboard memory composes four 72 pin SIMM sockets with only four banks and
can be expandable upto 128MB. Memory can be installed by using EDO DRAM or
Symmetrical and Asymmetrical DRAM SIMM RAM module.


MEMORY SIZE	 SM1       SM2       SM3       SM4
     
     4M		256K* 36  256K* 36  256K* 36  256K* 36
            	1M*36

     8M  	1M*36	   1M*36
               	2M*36

     12M        2M*36      1M*36

     16M        2M*36      2M* 36
                4M*36

     20M        4M* 36     1M*36

     32M        4M* 36     4M*36
                8M*36

     36M        8M*36      1M*36

     48M        8M*36      4M* 36

     64M        16M* 36

NOTE: SMI and SM3 or SM2 and SM4 can not use DOUBLE SIDED SIMM
     module at the same time , otherwise only one double sided SIMM module
     can be detected.

NOTE: The above memory configuration can also be configured by using SIM3
     and SIM4 , as the memory configuration is an auto detect design.


Mainboard Connectors
====================
J6      Speaker connector will be connected to the speaker ofyour computer
        case.

J2      Reset Switch connector will be connected in your computer case front
        panel. Resetting the system , it will restart the computer from
        self-test without turning off the power supply. This connection is
        always at "off" position.

J5      Keylock and Power LED connector will be connected in your computer
        case front panel. Keylock is used to lock the keyboard. Power LED will
        light up when you turn on your power supply.

J3      Turbo Switch Connector will be connected in your computer Case front
        pannel.

J4      Turbo LED Connector will be connected in your computer Case front
        pannel.

JP21	External SMI switch will be connected in your computer case front panel.
	This is used to activate the SMI function without waiting the setup
	time of the power managerment setup.
	Note: some case does not include this switch.

J1	External battery connector is used for the external battery. This is
 	used when internal battery is not connected.

KB1     Keyboard connector,this is used for inputting signal from the keyboard.

P1/P2   Power Supply connector is connected from the output of the powe supply.
        Most of the power supply has two connectors which will be connected
        tothe mainboard. Each connector has six wires ,two of the wires are
        black. To connect to the mainboard, make sure that the black wire is in
        the middle. Wrong connection will cause damage to the mainboard.


CMOS Charge / Discharge (Black jumper Cap)
==========================================
CMOS Charge / Discharge is used to discharge and charge CMOS. If you
discharge the CMOS all the data will be erased.

J1
2-3         Charge CMOS
1-2         Reset(discharge) CMOS
1-4	    External Battery Connector


Flash ROM Voltage Selector Red jumper Cap
=========================================
JP8        EPROM
1-2        Flash ROM 5 Volts      (SST Brand)
2-3        Flash ROM 12 Volts     (Intel, MX Brand)
Note: Wrong voltage setup will damage BIOS. Please call Edom for detail.


AWARD BIOS SETUP
================
Award BIOS support plug and play function and has a built-in setup program
that allows the users to modify the basic system configuration. This type of
information is stored in CMOS so that it retains the setup information when
the power is turned off.

1.      Turn on or reboot the system. when the below message appears at the
        bottom of the screen during the POST ( Power On Self Test ) press DEL
        key to enter setup.

2.      Press the DEL key to enter the Award BIOS program and the main menu
        will appear on the screen. The main menu allows you to select from ten
        setup functions and two exit choices.

3.      For the safe, please select "LOAD SETUP DEFAULTS" for BIOS setup.