| Main : Setup의 기본 환경 설정에 해당하는 부분 |
| System Date
: 날자 설정 |
| System Time
: 시간 설정 |
| Floppy Options
: Press Enter |
|
Floppy A |
Installed |
|
Floppy B |
Not Installed |
|
Floppy A: Type |
Not / 360K 5.¼/ 1.2M 5.¼ /
720KB ½ / 1.44M ½ / 2.88M ½ |
|
Floppy B: Type |
|
Floppy Access |
Read/Write, Read Only |
| Primary IDE Master
: 선택된 디바이스 명 표시 |
|
IDE Device Configuration |
Auto Configured, User Definable, Disabled |
|
IDE Translation Mode |
Standard CHS, Logical Block, Auto Detect |
|
Multiple Sector Setting |
Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected |
|
Fast Programmed I/O Modes |
Disabled, Auto Detected |
| Primary IDE Slave
: 선택된 디바이스 명 표시 |
|
IDE Device Configuration |
Auto Configured, User Definable, Disabled |
|
IDE Translation Mode |
Standard CHS, Logical Block, Auto Detect |
|
Multiple Sector Setting |
Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected |
|
Fast Programmed I/O Modes |
Disabled, Auto Detected |
| Secondary IDE Master
: 선택된 디바이스 명 표시 |
|
IDE Device Configuration |
Auto Configured, User Definable, Disabled |
|
IDE Translation Mode |
Standard CHS, Logical Block, Auto Detect |
|
Multiple Sector Setting |
Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected |
|
Fast Programmed I/O Modes |
Disabled, Auto Detected |
| Secondary IDE Slave
: 선택된 디바이스 명 표시 |
|
IDE Device Configuration |
Auto Configured, User Definable, Disabled |
|
IDE Translation Mode |
Standard CHS, Logical Block, Auto Detect |
|
Multiple Sector Setting |
Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected |
|
Fast Programmed I/O Modes |
Disabled, Auto Detected |
| Language
: English (US) |
| Boot Options
: Press Enter |
|
First Boot Device |
Disabled, Floppy, Hard Disk, CD-ROM, Network |
|
Second Boot Device |
Disabled, Floppy, Hard Disk, Network |
|
Third Boot Device |
Disabled, Floppy, Hard Disk, Network |
|
Fourth Boot Device |
Disabled, Floppy, Hard Disk, Network |
|
System Cache |
Enabled, Disabled |
|
Boot Speed |
Deturbo, Torbo |
|
Num Lock |
Off, On |
|
Setup Prompt |
Enabled, Disabled |
|
Hard Disk Pre-Delay |
Disabled, 3/6/9/12/15/21/30 Seconds |
|
Typematic Rate Programming |
Default, Override |
|
Typematic Rate Delay |
250msec, 500msec, 750msec, 1000msec |
|
Typematic Rate |
6, 8, 10, 12, 15, 20, 24, 30 char/sec |
|
Scan User Flash Area |
Disable: 이 항목은 사용되지 않음 |
|
Power-On COM1 Ring |
Disable: 이 항목은 사용되지 않음 |
| Video Mode |
EGA/VGA |
| Mouse |
Installed |
| Base Memory |
640 KB |
| Extended Memory |
xxxxxx KB |
| BIOS Version |
1.00.04.DT0 |
|
| Advanced : 설치된
OS와 주변기기에 대한 옵션 설정 |
| Pentium_ II :
CPU Type 표시(Processor
Type) |
| Processor Speed :
266 MHz(CPU 속도 표시) |
| Cache Size : 512(Cache 용량 표시) |
| Peripheral Configuration :
Press Enter |
|
Primary IDE Interface |
Auto Configured, Disabled |
|
Secondary IDE Interface |
Auto Configured, Disabled |
|
Floppy Interface |
Auto Configured, Disabled |
|
Serial Port1 Address |
Disabled, COM1 3F8 IRQ4, COM2 2F8 IRQ3, COM3 3E8 IRQ4, COM4 2E8 IRQ3,
COM1 3F8 IRQ3, COM2 2F8 IRQ4, COM3 3E8 IRQ3, COM4 2E8 IRQ4, Auto
Configured |
|
Serial Port2 Address |
Disabled, COM1 3F8 IRQ4, COM2 2F8 IRQ3, COM3 3E8 IRQ4, COM4 2E8 IRQ3,
COM1 3F8 IRQ3, COM2 2F8 IRQ4, COM3 3E8 IRQ3, COM4 2E8 IRQ4, Auto
Configured |
|
Serial Port2 IR Mode |
Disabled, Enabled: Serial IR Device 구입 시 |
|
Parallel Port Address |
Disabled, LPT3 3BC IRQ7, LPT1 378 IRQ7, LPT2 278 IRQ 7, LPT3 3BC IRQ5,
LPT1 378 IRQ5, LPT2 yes"> 278 IRQ5,
Auto Configured |
|
Parallel Port Mode |
Compatible, Bi-directional, ECP, EPP |
|
USB Interface |
Disabled, Enabled |
| Advanced Chipset Configuration
: Press Enter |
|
Base Memory Size
|
640KB |
|
ISA LFB Size |
Disabled, 1MB |
|
ISA LFB Base Address |
위 항목 선택 시 표시됨 |
|
Video Palette Snoop |
Disabled, Enabled |
|
ISA VGA Write Combining |
Disabled, Enabled |
|
Latency Timer(PCI Clocks) |
16, 24, 32, 40, ... , 120, 128, Auto Configured |
|
Bank 0 SIMM Detected |
메모리 타입 표시 |
|
Bank 1 SIMM Detected |
메모리 타입 표시 |
| Power Management Configuration
: Press Enter |
|
Advanced Power Management |
Disabled, Enabled |
|
IDE Drive Power Down |
Disabled, Enabled |
|
VESA Video Power Down |
Disabled, Standby, Suspend, Sleep |
|
Inactivity Timer(Minutes) |
0 ~ 255분(기본 10) |
|
Hot Key(Ctrl - ALT -) |
|
|
Auto Start On AC Loss |
Disabled, Enabled |
| Plug and Play Configuration
: Press Enter |
|
Configuration Mode |
Use BIOS Setup 선택 시 |
|
ISA Shared Memory Base Address |
C8000h, CC000h, D0000h, D4000h, D8000h, DC000h |
|
IRQ 5 |
Available, Used by ISA Card |
|
IRQ 9 |
Available, Used by ISA Card |
|
IRQ 10 |
Available, Used by ISA Card |
|
IRQ 11 |
Available, Used by ISA Card |
| Plug and Play Configuration
: Press Enter |
|
Configuration Mode |
Use PnP OS 선택 시 |
|
Disabled |
PnP정보를 BIOS에서 지정 |
|
Other PnP OS |
PnP정보를 다른 OS에서 지정 |
|
Windows 95 TM |
PnP정보를 Win95에서 지정 |
| Event Logging Configuration
: Press Enter(사용자 변경 불필요) |
|
Event Log Capacity |
Not Full |
|
Event Count Granularity |
10 |
|
Event Time Granularity(minutes) |
30 |
|
Event Log Control |
Enabled |
|
Clear Event Log |
No |
|
Mark Existing Events As Read |
No |
|
CRITICAL EVENTS IN LOG |
|
|
Single Bit ECC Errors Events |
None |
|
Multiple Bit ECC Errors Events |
None |
|
Parity Errors Events |
None |
|
Pre Boot Events |
1 |
|
| Security : Password 지정 |
| User Password is |
Not Installed |
| Administrative Password is |
Not Installed |
| Set User Password |
Press Enter |
| Set Administrative Password |
Press Enter |
|
| Exit : 셋업 설정 값 저장등에 관련 |
| Exit Saving Changes |
Press Enter |
| Exit Discarding Change |
Press Enter |
| Load Setup Default |
Press Enter |
| Discard Change |
Press Enter |
|
