EAGLE+ 보드의 점퍼 설정
클럭 설정
| JP5 | JP6 | FREQUENCY RATIO | PENTIUM PROCESSOR |
| 1-2 | 1-2 | 2-3 | 75/50, 90/60, 100/66 |
| 1-2 | 2-3 | 1-2 | 100/50, 120/60, 133/66 |
| 2-3 | 1-2 | 1-3 | 150/50, 180/60, 200/66 |
| 2-3 | 2-3 | 2-5 | 150/60, 166/66 |
| CPU&PCI 클럭설정 | JP7 | JP8 | CPU 내부클럭 | PCI클럭 |
| 2-3 | 1-2 | 50MHz | 25 MHz | |
| 2-3 | 2-3 | 60MHz | 30 MHz | |
| 1-2 | 1-2 | 66MHz | 33 MHz | |
| 1-2 | 2-3 | RESERVED | RESERVED |
|
CPU Voltage 설정 |
|||
|
Processor Voltage Selection(J4, JP3, JP4) |
JP4 | CPU VOLTAGE | PROCESSOR |
| G (1-4) | 2.8V(JP3 OPEN, JP4 SHORT) | P55C | |
| E (3-6) | 3.3V(JP3 SHORT, JP4 OPEN) | P54C, M1 | |
일반 설정
| 기 능 | 점 퍼 | 설 정 | |
| CMOS Clear | JP9 | 1-2 (사용안함) | 2-3 (사용) |
| FDD 쓰기 금지 | JP12 | 1-2 (사용안함) | 2-3 (사용) |
| Serial Access | JP10, JP11 | 1-2, 1-2 | NORMAL |
| 2-3, 2-3 | PROTECT | ||
