| AMAZON II/III Main B/D CMOS SETUP | |||
| 사용 키 | |||
| Help(도움말) | F1 | ||
| Back(이전 항목 이동) | ESC | ||
| Select(선택) | Enter | ||
| Previous Item(이전 항목) | 위 방향 키 | ||
| Next Item(다음 항목) | 아래 방향키 | ||
| Select Menu(메뉴 선택) | 좌, 우 방향 키 | ||
| Setup Default(기본 셋업) | F5 | ||
| Previous Values(이전 값) | F6 | ||
| Save & Exit(저장 및 종료) | F10 | ||
| 부팅 시 F1 KEY 누름 | |||
| 1단계 | 2단계 | 3단계 | 선택 옵션 |
| Main | System Date | 날자 설정 | |
| System Time | 시간 설정 | ||
| Floppy Options | Press Enter | ||
| Floppy A: | Installed | ||
| Floppy B: | Installed | ||
| Floppy A | Not / 360K 5.¼/ 1.2M 5.¼ / | ||
| Floppy B | 720KB ½ / 1.44M ½ / 2.88M ½ | ||
| Floppy Access | Read/Write | ||
| Primary IDE Master | 선택된 디바이스 명 표시 | ||
| IDE Device Configuration | Auto Configured, User Definable, Disabled | ||
| IDE Translation Mode | Standard CHS, Logical Block, Auto Detect | ||
| Multiple Sector Setting | Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected | ||
| Fast Programmed I/O Modes | Disabled, Auto Detected | ||
| Primary IDE Slave | IDE Device Configuration | Auto Configured, User Definable, Disabled | |
| IDE Translation Mode | Standard CHS, Logical Block, Auto Detect | ||
| Multiple Sector Setting | Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected | ||
| Fast Programmed I/O Modes | Disabled, Auto Detected | ||
| Secondary IDE Master | IDE Device Configuration | Auto Configured, User Definable, Disabled | |
| IDE Translation Mode | Standard CHS, Logical Block, Auto Detect | ||
| Multiple Sector Setting | Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected | ||
| Fast Programmed I/O Modes | Disabled, Auto Detected | ||
| Secondary IDE Slave | IDE Device Configuration | Auto Configured, User Definable, Disabled | |
| IDE Translation Mode | Standard CHS, Logical Block, Auto Detect | ||
| Multiple Sector Setting | Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected | ||
| Fast Programmed I/O Modes | Disabled, Auto Detected | ||
| Language | English (US) | ||
| Boot Options | Press Enter | ||
| First Boot Device | Disabled, Floppy, Hard Disk, CD-ROM, Network | ||
| Second Boot Device | Disabled, Floppy, Hard Disk, Network | ||
| Third Boot Device | Disabled, Floppy, Hard Disk, Network | ||
| Fourth Boot Device | Disabled, Floppy, Hard Disk, Network | ||
| System Cache | Enabled, Disabled | ||
| Boot Speed | Deturbo, Torbo | ||
| Num Lock | Off, On | ||
| Setup Prompt | Enabled, Disabled | ||
| Hard Disk Pre-Delay | Disabled, 3/6/9/12/15/21/30 Seconds | ||
| Typematic Rate Programming | Default, Override | ||
| Typematic Rate Delay | 250msec, 500msec, 750msec, 1000msec | ||
| Typematic Rate | 6, 8, 10, 12, 15, 20, 24, 30 char/sec | ||
| Scan User Flash Area | Disable: 이 항목은 사용되지 않음 | ||
| Video Mode | EGA/VGA | ||
| Mouse | Installed | ||
| Base Memory | 640 KB | ||
| Extended Memory | xxxxxx KB | ||
| BIOS Version | x.xx.xx.xxx | ||
| Advanced | Processor Type | CPU Type 표시 | |
| Processor Speed | CPU 속도 표시 | ||
| Cache Size | Cache 용량 표시 | ||
| Peripheral Configuration | Press Enter | ||
| Primary IDE Interface | Auto, Disabled, Enabled | ||
| Secondary IDE Interface | Auto, Disabled, Enabled | ||
| Floppy Interface | Auto, Disabled, Enabled | ||
| Serial Port1 Address | Disabled, COM1 3F8 IRQ4, COM2 2F8 IRQ3, COM3 3E8 IRQ4, COM4 2E8 IRQ3, COM1 3F8 IRQ3, COM2 2F8 IRQ4, COM3 3E8 IRQ3, COM4 2E8 IRQ4, Auto | ||
| Serial Port2 IR Mode | Disabled: 본 제품은 지원하지 않음 | ||
| Parallel Port Address | Disabled, LPT3 3BC IRQ7, LPT1 378 IRQ7, LPT2 278 IRQ 7, LPT3 3BC IRQ5, LPT1 378 IRQ5, LPT2278 IRQ5, Auto | ||
| Parallel Port Mode | Compatible, Bi-directional, ECP, EPP | ||
| USB Interface | Disabled, Enabled | ||
| Advanced Chipset Configuration | Press Enter | ||
| Base Memory Size | 640KB | ||
| ISA LFB Size | Disabled, 1MB | ||
| ISA LFB Base Address | 위 항목 선택 시 표시됨 | ||
| Video Palette Snoop | Disabled, Enabled | ||
| Latency Timer(PCI Clocks) | 0 ~ 255( 기본: 66) | ||
| Bank 0 SIMM Detected | 메모리 타입 표시 | ||
| Bank 1 SIMM Detected | 메모리 타입 표시 | ||
| Power Management Configuration | Press Enter | ||
| Advanced Power Management | Disabled, Enabled | ||
| IDE Drive Power Down | Disabled, Enabled | ||
| VESA Video Power Down | Disabled, Standby, Suspend, Sleep | ||
| Inactivity Timer(Minutes) | Auto configured, 16, 24, 32, ... , 120, 128 | ||
| Hot Key(Ctrl - ALT -) | |||
| Auto Start On AC Loss | Disabled, Enabled | ||
| Power Down COM1 Ring | Disabled, Enabled | ||
| Plug and Play Configuration | Press Enter | ||
| Configuration Mode | Use Setup Utility 선택 시 | ||
| ISA Shared Memory Size | Disabled, 16, 32, 48, 64, 80, 96KB | ||
| IRQ 5 | Available, Used by ISA Card | ||
| IRQ 9 | Available, Used by ISA Card | ||
| IRQ 10 | Available, Used by ISA Card | ||
| IRQ 11 | Available, Used by ISA Card | ||
| Plug and Play Configuration | Press Enter | ||
| Configuration Mode | Use ICU 선택 시 | ||
| Boot with PnP OS | Non, Other, Windows 95 TM | ||
| Event Logging Configuration | Press Enter(사용자 변경 불필요) | ||
| Event Log Status | Valid | ||
| Log Capacity | Available | ||
| Count Granularity | 10 | ||
| Time Granularity(minutes) | 30 | ||
| Log Control | Enabled | ||
| Clear Log | No | ||
| Mark Existing Event Read | No | ||
| Critical Events in Log: | |||
| Single Bit ECC Errors | None | ||
| Multiple Bit ECC Errors | None | ||
| POST Errors | None | ||
| Security | User Password is | Enabled | |
| Administrative Password is | Enabled | ||
| Set User Password | Press Enter | ||
| Set Administrative Password | Press Enter | ||
| Exit | Exit Saving Changes | Press Enter | |
| Exit Discarding Change | Press Enter | ||
| Load Setup Default | Press Enter | ||
| Discard Change | Press Enter | ||