| Detail |
Workaround / Future
Solution |
| Power management support is minimal |
Limitation with current release of BIOS |
| No ACPI support |
Limitation with current release of BIOS |
| No fan control |
Limitation with current release of BIOS |
| No support for DMI/SMBIOS |
Limitation with current release of BIOS |
| No support for chassis intrusion security |
Limitation with current release of BIOS |
| No support for user defined defaults in NVRAM |
Limitation with current release of BIOS |
| No wake up support except power button |
Limitation with current release of BIOS |
| No alert on LAN |
Limitation with current release of BIOS |
| No legacy USB support |
Limitation with current release of BIOS |
| LAN BIOS is not final |
Waiting final BIOS from Intel |
| Video BIOS is a beta version |
Waiting final BIOS from Intel |
| Some setup options have incorrect help text |
Limitation with current release of BIOS |
| Detail |
Workaround / Future
Solution |
| Connector PL2 (Combined Video, Com1 & Parallel
ports) is siting approx. 0.6 to 0.8 mm above the PCB, max limit is 0.5mm |
This was due to a problem with the carrier used at wave
solder during manufacture. The carrier will be modified for production |
| Connectors PL21 (floppy), PL22 & PL 16 (Primary
& secondary IDE) are open pin headers |
These will be shrouded for production |
| The wake-up function on 'Ring Indicate' from an
external MODEM is not operational |
Rev B limitation |
| National 363 Super I/O fitted on the board Featured
boards does not support voltage monitoring |
National 366 Super I/O samples not yet available |
| Reset input on the 'Front Panel' pin header is not
supported |
Rev B limitation |
| The integrated LAN (RJ45) and dual USB connector is not
fitted |
Samples not yet available |
