SEARCH CONTACT US SUPPORT SERVICES PRODUCTS STORE
United States    
COMPAQ STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
 

Maintenance and Service Guide
Compaq 2200 and 2400 Series Computers

MSG Index Product Description Removal & Replacement Illustrated Parts Catalog
Home Troubleshooting Jumper & Switch Information Specifications
I-O panel
Processor
Memory module
Battery
System board
System board components index page
l

 

 

 

 

 
REMOVAL & REPLACEMENT

System Board Components

Processor and heatsink

E26.gif (12213 bytes)
1 Perform preparation procedures.
2 Remove the hood.
3 Remove the clip bub1.gif (838 bytes) from the heat sink bub2.gif (842 bytes).
4 Lift the heat sink bub2.gif (842 bytes) from the processor.
NOTE The processor may come out directly with the heat sink.
5 Raise the ZIF socket lever bub4.gif (843 bytes) and lift the processor bub3.gif (841 bytes) out of the socket.

To reinstall the processor, rub a thermal transfer crayon on the bottom of the heatsink, then reverse the steps above. (The thermal transfer crayon replaces the thermal pad used with earlier processors.)

 
1.800.AT.COMPAQ
 
privacy and legal statement