Official BIOS release 8B for ST6E/ST6E-RAID V1.0 Release information: [ENGLISH] 1. Raise the adjustable CPU Core Voltage from +0.125v to +0.2v for Celeron and PentiumIII 0.13 micron process processors. 2. HPT 370 RAID BIOS version 2.0.1024. The RAID function is for ST6E-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected. 3. BIOS Compile date: 03/05/2002. [TRADITIONAL CHINESE] 1. 針對 0.13 製程的 Celeron 及 PentiumIII 處理器增加 CPU 核心電壓之可調整 範圍。 2. HPT 370 BIOS 版本: 2.0.1024。適用於 ST6E-RAID。本 BIOS 同時適用於非 RAID 之主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 disable HPT BIOS。 3. BIOS日期: 03/05/2002。 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "st6e8b.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power core and then clear the CMOS data via jumper before restarting system please. ============================================================================.