BIOS release 14 for NF7/NF7-S V2.0 Release information: [ENGLISH] New Fixes/Features 0. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23K is included in this BIOS package. 1. Fixed CPU temperature too high issue. 2. Raised highest CPU FSB up to 300 MHz for "user define mode" in SoftMenu. 3. Fixed SATA RAID-0 data corruption issue by adding a new option "EXT-P2P's Discard Time" in "integrated Peripherals". The default setting is "30 us" ; which is recommended by NVidia. In case the problem is still there, try "1 ms" please. 4. Changed DDR400 DRAM timing according to NVidia's recommendation. 5. Updated BPL to v3.01 according to NVidia's recommendation. 6. BIOS Compile Date: 5/14/2003. [中文] 0. 請使用 AWDFLASH 8.23D 或更新版本來更新 NF7 系列主機板之 BIOS。 使用 不適當版本的 AWDFLASH 程式,會消除 GUID 並導致 IEEE1394 peer to peer 功能失效。 AWDFLASH 8.23K 已包含在本 BIOS 自解檔案中。 1. 修正 CPU 溫度讀數過高的問題。 2. 調整 SoftMenu 中 user define 模式的最高 CPU 外頻為 300 MHz。 3. 修正 SATA RAID-0 資料傳輸錯誤的問題;在 integrated Peripherals 頁面新增 選項 EXT-P2P's Discard Time 依據 NVidia 建議的預設值為 30 us,如果說此 設定值仍然有資料傳輸錯誤的問題,請修改為 1 ms。 4. 依據 NVidia 建議修改 DDR400 DRAM timing。 5. 依據 NVidia 建議更新 BPL 至 v3.01。 6. BIOS 日期: 5/14/2003。 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "nf7d14.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================