BIOS release 1.3 for NF7-S/NF7/NF7-M v1.0/V1.1

Release information:

[ENGLISH]

0. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With 
   incorrect AWDFLASH version, the GUID will be erased, and leads to 
   IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in 
   this BIOS package.
1. Revise the CPU Interface Table for 333FSB CPU.
2. Correct the CPU Temperature misreading issue. With BIOS V1.0, 1.1,
   and V1.2, the CPU temperature reported in BIOS is too hight. V1.3
   BIOS fixes it and report correct CPU temperature; meanwhile, the
   Hardware Monitoring tool needs to be updated to "HWM_NF7V13.EXE"
   together with BIOS update.
3. Change default year to 2003.
4. Update SiliconImage Sil3112A BIOS to v4.2.00.
5. Add new function- Shutdown when CPU FAN fail.
6. Revise function- "CPU shutdown temperature" and "CPU warning temperature".
7. Fix Windows XP fail to shutdown when "USB support" is set to "By BIOS".
8. Support AMD 333 FSB Barton CPU.
9. BIOS Compile Date: 1/07/2003.

[中文]

0. 請使用 AWDFLASH 8.23D 或更新版本來更新 NF7 系列主機板之 BIOS。 使用
   不適當版本的 AWDFLASH 程式，會消除 GUID 並導致 IEEE1394 peer to peer
   功能失效。 AWDFLASH 8.23D 已包含在本 BIOS 自解檔案中。
1. 修正 333MHz CPU 的 CPU Interface table。
2. 修正 V1.0、V1.1 和 V1.2 版 BIOS 讀取 CPU 溫度過高的問題。本版 V1.3
   BIOS 必須搭配新版硬體監控程式 HWM_NF7V13.EXE 使用。
3. 將 BIOS 預設年份改為 2003年。
4. 升級 Sil3112A BIOS 版本至 v4.2.00。
5. 加入新功能- 當 CPU 風扇失效不轉動時關閉系統，以保護 CPU 防止燒毀。
6. 修正功能- CPU 過熱警告、CPU 過熱關機。
7. 修正問題- 當 USB support 設定為 By BIOS 時 Windows XP 無法關機的問題。
8. 支援新款式 AMD 333FSB Barton CPU。
9. BIOS Compile Date: 1/07/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "nf713.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================