Official BIOS release 1.1 for NF7-S v1.0

Release information:

[ENGLISH]

0. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With 
   incorrect AWDFLASH version, the GUID will be erased, and leads to 
   IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in 
   this BIOS package.
1. Change "Enhance PCI Performance" function default to "Disabled"。
2. Change Init Display First default to AGP。
3. Update Sil BIOS to 4.1.36C.
4. Update BPL ROM file to 2.72.
5. Fixed the issue that USB can not assign IRQ when there is PCI card 
   installed on PCI slot 2 or 3.
6. Fixed the issue that the system cannot be woke up by "Wake Up" key when 
   set power-on function to Keyboard 98.
7. Fixed the issue that system cannot be woke up from S3 and debug code 
   shows 01h.
8. The way MAC address is filled into UUID is changed.
9. BIOS date:11/14/2002


[TRADITIONAL CHINESE]

0. 請使用 AWDFLASH 8.23D 或更新版本來更新 NF7 系列主機板之 BIOS. 使用不適當
   版本的 AWDFLASH 程式，會消除 GUID 並導致 IEEE1394 peer to peer 功能失效。
   AWDFLASH 8.23D 已包含在本 BIOS 自解檔案中。
1. 將 "Enhance PCI Performance" 選項的預設值更改為"Disabled"。
2. 將 "Init Display First" 選項預設值更改為 AGP。
3. 更新 Sil BIOS file 為 4.1.36C。
4. 更新 BPL ROM file 為 2.72。
5. 修正在PCI Slot2 或 Slot3 插上界面卡會導致 USB 無法分置 IRQ。
6. 解決當選取 Keyboard98 時，使用鍵盤的 "Wake Up" 鍵時無法喚醒系統。
7. 修正在 S3 模式下，系統無法喚醒，偵錯碼顯示 01h。
8. 修改 MAC Address 填入 UUID 的方式。
9. BIOS 日期: 11/14/2002。

*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "nf711.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.