KT7/KT7-RAID/KT7A/KT7A-RAID  BIOS Revision WW

Release infomation:

 1.Adds CPU protecting function.
   !WARNING! If the CPU fan reading of fan header #1
   lower than 2000 rpm, or the fan is connected on 
   header #2/#3/#4 or directly to power supply unit, 
   this BIOS will automatically SHUTDOWN THE POWER 
   IN 10 SECONDS. This design protect the processor 
   from damage by heat.
 2.Fixes the fail to boot issue after Load Default then
   save setting and exit BIOS.
 3.Fixes the Fast Write function failed when the Enhance
   Chip Performance function enabled.
 4.Fixes the delay issue for certain DVD-ROM during booting
   up.
 5.Fixes the misreading issue for certain VCM 256M memory
   module.
 6.BIOS compile date 12/15/2000
 7.RAID BIOS version v1.0.3b1 (RAID function is for 
   KT7-RAID and KT7A-RAID only)

!WARNING!

 If you are not sure the current CPU fan is correctly on fan 
 header #1, DON'T UPDATE TO WW PLEASE! The header #1 is closer 
 to memory sockets while header #2 is closer to CPU socket. 
 Wrongfully update to WW may cause system never boot up again 
 unless you connect a suitable CPU fan on header #1. 

How to upgrade BIOS:

 01. Boot from MS-DOS, of "Safe Command Mode" if you have Windows95/98
 02. Run "kt7ww.exe" to extract all files.
 02. Run "runme.bat"

***  Please mention that we suggest you flash bios with parameter 

           "/cc /cd /cp /py /sn /cks /R" or by "runme.bat".