Official BIOS release BP for BL7-RAID/BW7-RAID

Release information:

[ENGLISH]

1. Load proper setting automatically for Willamette CPU when Load Fail
   -safe/Optimized Default in BIOS.  
2. Support Celeron 2.0G CPU (for BL7/BL7-RAID only).
3. Support PMC Pm49FL004T 4Mb Flash ROM.
4. Fill in new CPU micro code (0F27).
5. HPT 37x BIOS version 2.0.1024. The RAID function is for BL7-RAID and
   BW7-RAID only. This BIOS version is also for non RAID boards and HPT
   BIOS will be automatically disabled while RAID controller chip not
   detected.
6. BIOS compile date: 9/16/2002


[TRADITIONAL CHINESE]

1. 新增使用 Willamette CPU時, 於BIOS Setup中, Load Fail-Safe/Optimized 
   Default 後, SoftMenu 選單會自動選擇所符合該CPU 的設定表。
2. 支援 Intel P4 Celeron 2.0G CPU。(僅供 BL7/BL7-RAID).
3. 支援 PMC Pm49FL004T 4Mb Flash ROM.
4. 填入新的 CPU micro code (0F27)。
5. HPT 37x BIOS version: 2.0.1024。適用於 BL7-RAID, BW7-RAID。本 BIOS 同時
   適用 於非 RAID 之主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會
   自動 disable HPT BIOS。 
6. BIOS 日期: 9/16/2002


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bldw7bp.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================