Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

PCI TOKEN-RING ADAPTER-2 POWER OFF/ON PROBLEM



Subject: PCI TOKEN-RING ADAPTER-2 POWER OFF/ON PROBLEM
New Netfinity server RETAIN Tip: 

    Record number:       H165760
    Device:              D/T8644
    Model:               M
    Hit count:           UHC00009
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O99/01/15
    Date last altered:   A99/01/15
    Owning B.U.:         USA


Abstract: PCI TOKEN-RING ADAPTER-2 POWER OFF/ON PROBLEM


SYMPTOM:

When you power down your PC by turning off the power switch,
it shuts downs but then immediately powers back on.
This occurs only on a PC with an IBM 16/4 Token-Ring PCI Adapter-2 installed.

Simply entering a low-power state, such as suspend mode, will not cause the problem.
Also, non-ACPI machines (which do not react to the PCI PME signal) will not experience the problem; on ACPI machines that can disable ACPI or PME, turning that function off will hide the problem.


PROBLEM ISOLATION AIDS:


FIX:

The problem is likely due to a defect on the adapter, which may need to be replaced.

  1.  If the adapter is still sealed inside the retail carton, examine the label on the end  flap of the carton:

    1.  If the label has a green dot affixed to it, the adapter does not need to be replaced.
    2.  If the label does not have a green dot, examine the adapter serial number printed on that label.

  2.  If the adapter has already been removed from its retail carton and not installed in a PC,  examine the adapter part number label:

    1.  If the adapter part number label shows card ASM P/N 30L6826, the adapter needs to be replaced.
    2.  If the adapter part number label shows card ASM P/N 31L3520, the adapter does not need to be replaced.

  3.  If the adapter has already been installed in a PC examine the MAC address label affixed to the adapter bracket:

    1.  If the MAC address printed on the bracket label is in the ranges 002035310000-00203531FFFF or  002035AE0000-002035AE3C8B, the adapter might need to be replaced.
       In order to determine for sure, remove the adapter from the PC, check the adapter's assembly  part number and make the determination using the criteria in the above example.
    2.  If the MAC address printed on the bracket label is not in the above MAC address ranges,  the adapter does not need to be replaced.


The customer should contact their closest IBM HelpCenter and request Networking help.
To expedite the replacement process, you will need to have the following information prior to calling:


Please note that this problem does not occur with the IBM 16/4 Token-Ring PCI Adapter-2
with Wake on LAN, but ONLY with the non-WOL adapter.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.