Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

MICROSOFT CLUSTER SERVER RESOURCES FAIL AFTER APPLYING SP4



Subject: MICROSOFT CLUSTER SERVER RESOURCES FAIL AFTER APPLYING SP4
New Netfinity server RETAIN Tip: 

    Record number:       H165468
    Device:              D/T8644
    Model:               M
    Hit count:           UHC00000
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O98/12/09
    Date last altered:   A98/12/09
    Owning B.U.:         USA


Abstract: MICROSOFT CLUSTER SERVER RESOURCES FAIL AFTER APPLYING SP4


SYMPTOM:

After applying Microsoft Service Pack 4 in a Microsoft Cluster Server (MSCS) environment, cluster resources that rely on NetBIOS will fail.
The following event will be written to the Windows NT system event log:

      "Event ID 1051: Cluster Network Name resource '<Network
      Name>' cannot be brought on-line because it does not
      depend on an IP Address resource. Please add an IP
      Address dependency."


PROBLEM ISOLATION AIDS:


FIX:

The failing resource(s) will have a dependence on a IP cluster resource(s) with in the same cluster group. Right click this IP cluster resource and choose properties, then select the "Parameters" tab from the Properties windows, check the "Enable NetBIOS for this address" box.
Bring the failed cluster group on-line.


DETAILS:

Microsoft Windows NT Service Pack 4 has added a newly definable parameter to the IP cluster resource, titled "Enable NetBIOS for this address".
Previous to Windows NT Service Pack 4 this parameter was always enabled.
After Service Pack 4 is applied, the problem arises when an application creates a IP and Network Name resource and the required dependencies.
The application is not aware of the "Enable NetBIOS of this address" parameter, so it is not set. When the newly created group is brought on-line the Network Name resource will fail.
A fix for Oracle "Fail Safe" should be available from Oracle with in the next several weeks (Dated: 12/7/98).
If Microsoft Cluster Administrator is running remotely i.e. not on either node in the cluster) you must update the remote system to Windows NT Service Pack 4.
This will allow you to view the new "Enable NetBIOS of this address" parameter from the Microsoft Cluster Administration program.


TRADEMARKS:

Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States and/or other countries.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.