Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

10/100 ETHERJET PCI ADAPTER: POOR PERFORMANCE, DISCONNECTS



Subject: 10/100 ETHERJET PCI ADAPTER: POOR PERFORMANCE, DISCONNECTS
New Netfinity server RETAIN Tip: 

    Record number:       H165120
    Device:              D/T8660
    Model:               M
    Hit count:           UHC00000
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O98/10/21
    Date last altered:   A98/10/21
    Owning B.U.:         USA


Abstract: 10/100 ETHERJET PCI ADAPTER: POOR PERFORMANCE, DISCONNECTS


SYMPTOM:

When running the network in Full Duplex mode, the network may be running slowly, or network disconnection's may occur.


PROBLEM ISOLATION AIDS:


FIX:

Manually turn on Full Duplex mode instead of allowing the adapter to auto-negotiate.
You will need to manually set Full Duplex in the network switch, as well as in the Server and the Client device driver for the adapter.


DETAILS:

The problem is caused by a network switch that does not support auto negotiation mode.
As with any network adapter, if the hub or switch is configured for full duplex and does not support auto negotiation, then you must use the device driver manual overrides for proper operation in full duplex mode.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.