Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

NETWARE not CONNECTING with 10/100 FAULT TOLERANT ADAPTER



Subject: NETWARE not CONNECTING with 10/100 FAULT TOLERANT ADAPTER
New Netfinity server RETAIN Tip: 

    Record number:       H165005
    Device:              D/T8659
    Model:               M
    Hit count:           UHC00000
    Success count:       USC0000
    Publication code:    PC50
    Tip key:             002
    Date created:        O98/10/21
    Date last altered:   A98/10/21
    Owning B.U.:         USA


Abstract: NETWARE not CONNECTING with 10/100 FAULT TOLERANT ADAPTER


TEXT:

NetWare not connecting with 10/100 Fault Tolerant Adapter


SYMPTOMS:

Incorrect driver will be installed for "IBM Netfinity 10/100 Fault Tolerant Adapter" resulting in a non-functioning LAN adapter.


PROBLEM ISOLATION AIDS:


WORKAROUND:

If your server has an "IBM Netfinity 10/100 Fault Tolerant Adapter" installed, and the integrated ethernet controller on the system board is disabled, you must do the following to allow ServerGuide to copy the necessary drivers for the adapter to properly work:

For the Netfinity 5000 server before using the SoftwareGuide CD:


TRADEMARKS:

Other company, product and service names may be the trademarks or service marks of others.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.