Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

INABILITY to HOT-ADD PCI DEVICES with 4GB of MEMORY



Subject: INABILITY to HOT-ADD PCI DEVICES with 4GB of MEMORY
New Netfinity server RETAIN Tip: 

    Record number:       H164908
    Device:              D/T8680
    Model:               M
    Hit count:           UHC00002
    Success count:       USC0000
    Publication code:    PC50
    Tip key:             004
    Date created:        O98/10/14
    Date last altered:   A98/10/14
    Owning B.U.:         USA


Abstract: INABILITY to HOT-ADD PCI DEVICES with 4GB of MEMORY


TEXT:

Inability to hot-add PCI Devices with 4GB of memory.


SYMPTOM:

The Hot-Plug wizard may return the error "PCI Resources required by this device could not be allocated" when attempting to hot-add an adapter to a system with 4GB of memory.

This failure ONLY occurs on hot add and will work O.K. on a hot replace because memory space was previously allocated for that slot.


PROBLEM ISOLATION AIDS:


FIX:

There is not a permanent fix available at time of writing. This condition will remain until new Windows NT hotplug drivers are released. The new hotplug drivers will be released by Microsoft for Windows NT 4.0. The new hotplug Device Driver will also be added to Windows NT 5.0, when available.


WORKAROUND:

Prior to loading hotplug adapters, set memory at less than 4GB. Load adapters and then reset memory to 4GB.


TRADEMARKS:

Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States and/or other countries.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.