Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

"90" POWER SYSTEM ERRORS NOT REPORTED on the FRONT PANEL



Subject: "90" POWER SYSTEM ERRORS NOT REPORTED on the FRONT PANEL
New Netfinity server RETAIN Tip: 

    Record number:       H164907
    Device:              D/T8680
    Model:               M
    Hit count:           UHC00001
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O98/10/14
    Date last altered:   A98/10/14
    Owning B.U.:         USA


Abstract: "90" POWER SYSTEM ERRORS NOT REPORTED on the FRONT PANEL


SYMPTOM:

Errors created by over voltage conditions will not be displayed in the Front Panel although they are being logged in the System Error Log. On an abrupt system shut down due to a catastrophic failure, refer to the System Error Log (F1 at POST) and these errors will be seen.


PROBLEM ISOLATION AIDS:


FIX:

The next level of SP code 31A will put the error message on the front panel.


WORKAROUND:

If failure occurs and system shuts down, you need to remove AC power to reset system.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.