Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

ECA 023: NEW CABLE MANAGEMENT ARM and RACK MOUNTING FLANGES



Subject: ECA 023: NEW CABLE MANAGEMENT ARM and RACK MOUNTING FLANGES
New Netfinity server RETAIN ECA023: 

     Record number:       H164393
     Device:              D/T8660         Service code:      33
     ECA number:          ECA023          Parts source:      LOC
     EC number:           EC000000        Publish flag:      R
     Mandatory:           N               Hit count:         UHC00000
     Automatic shipment:  N               Success count:     USC0000
     Availability date:   98/07           Publication code:  PC50
     Plant of control:    23              Date created:      O98/07/13
     Tip key:                             Date last altered: A98/07/17
                                          Owning B.U.:       USA


Abstract: ECA 023: NEW CABLE MANAGEMENT ARM and RACK MOUNTING FLANGES


PURPOSE:

This ECA provides for installation of FBM kit FRU P/N 28L0631 to replace one (1) Cable Management Arm, and / or four (4) rail mounting flanges contained in "Rack Accessory Kit" P/N 12J3777 which shipped in some Servers.

Servers eligible under this ECA must hold true to the "Physical Check" section of this document.

FBM kit FRU P/N 28L0631 contains a improved design of four (4) rail mounting flanges and one (1) Cable Management Arm.

This ECA does NOT provide for installing a Netfinity server 5500 Type 8660 into a customer rack, and it does NOT provide for installing a "Tower To Rack Conversion Kit" Option P/N 01K8020 (FRU P/N 03K8775).


This ECA023 will expire March 31, 2005.

FEATURES:

   Type,                  Machines Affected
   Model,   With          and/or Feature/Device     B/M to be    Service  System
   Stage    B/M           Description               Installed    Hours    Hours
                          USA:
   8660     B/M12J3777    NETFINITY 5500_SERVER     B/M28L0631   00.7     00.5
                          MODEL 1RU, 1RX, 4RU
                          EMEA:
   8660     B/M12J3777    SAME SYSTEMS              B/M28L0631   00.7     00.0
                          TRAVEL PER SITE: 0.8HR
                          PSS CE SERVICE TIME
                          PER SYSTEM:      0.7HR


PHYSICAL CHECK:

All of the following must be true for this ECA to be applied for purposes of replacing the Cable Management Arm Assembly:


* Supported EIA Rack:

A industry standard 19-inch rack cabinet that meets the EIA-310-D standards for depth of at least 30 inches and if equipped with a front door, has a rack rail to front door minimum clearance of 50.8mm (2 in.) which has square, round, or round threaded rail holes.

NOTE: The "Tower to Rack Conversion Kit" Option P/N 01K8020 (FRU P/N 03K8775) is NOT affected, and does NOT apply to this ECA.


PREREQUISITES: none

COMPANION: none

CONCURRENT: none


DETAIL:

The Cable Management Arm and the rail mounting flanges that are provided in the "Rack Accessory Kit" P/N 12J3777 which ships with the Netfinity 5500 server Type 8660 model 1RU, 1RX, 4RU have been improved by design and are packaged in FBM Kit FRU P/N 28L0631.

The change to the Cable Management Arm ensures that the Arm assembly folds within the rear confines of supported* EIA Racks.

The change to the rail mounting flanges allow mounting the Server in a industry standard 19-inch rack cabinet that meets the EIA-310-D standards for depth of at least 30 inches, and has a rack rail to front door minimum clearance of 50.8mm (2 in.) which has square, round, or round threaded rail holes.

Customers may request this ECA be applied if their System holds true to the "PHYSICAL CHECK" section of this document by calling IBM Serve at 1-800-IBM-SERV or by contacting the IBM HelpCenter for their GEO.

NOTE: The "Rack Accessory Kit" P/N 12J3777 shipped with a limited number of rack-mount Netfinity 5500 servers Type 8660 models 1RU, 1RX, 4RU. These model Servers presently ship with a new "Rack Accessory Kit" P/N 28L0645** or 28L0646** which include the improved design Cable Management Arm and rail mount flanges.

** P/N 28L0645 and 28L00646 are not Option or FRU part numbers.


ACTION:

If the System holds true to the "PHYSICAL CHECK" section of this document, then apply this ECA as follows:

Order FBM Kit FRU p/n28L0631 and install the new components (whichever apply) per the instruction sheets contained in the FBM Kit.

NOTE: DO NOT attempt to apply this ECA for purposes of upgrading a Tower Model Server to a Rack Model. The FBM kit only provides a few improved design components to the original "Rack Accessory Kit" P/N 12J3777 that shipped with the Netfinity 5500 server Rack Models.

NOTES:


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.