Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

ECA 056 - Artic multiport/a +8595



ECA 056 - Artic multiport/a + 8595

 

Artic multiport/2, 8595 w/intermittent errors

PURPOSE:
To determine if the Artic multiport/2 adapter should be replaced as described in the detail of this ECA:.

PHYSICAL check:
Check for part number 09F1877 or 57F2712 on the gate array (large silver component located above the bus connector) and for the presence of components in positions U21 and U22. Affected adapters will have one of the above part numbers and components in positions U21 and U22.

DETAIL:
The Multiport/2 adapter may cause the following intermittent errors when installed in an 8595:
These failures may be system and slot sensitive.

NOTEs:
Replace the Artic multiport/2 adapter P/N 09F1888 (512KB) or P/N 09F1962 (1MB) as appropriate.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.