Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

General Checkout (9516)



General Checkout

  The LCD panel contains over 3.900.000 thin-film transistors (TGTs). A small number of missing, discolored, or lighted dots on the screen is an intrinsic characteristic of TFT LCD technology and is not an LCD defect.


Before performing the following steps, read 'Safety Inspection' to see if an inspection is needed.
  1.  Turn off both the display and the attached system unit.
  2.  Disconnect the power cord from the ac outlet.
  3.  Make sure that the signal cables from the system unit are connected to their respective connectors on the rear of the display.
  4.  Make sure that the dc power cable of the AC Adapter is connected to the DC-IN connector at the rear of the display.
  5.  Connect one end of the power cord to the AC Adapter and the other end to the ac outlet.
  6.  Turn on the system unit, then turn on the display.


  MAP's


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.