Configure/View Host Adapter Settings

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Configure/View Host Adapter Settings

Configure/View Host Adapter Settings

To view or change the SCSI-2 controller settings, select Configure/View Host Adapter Settings and follow the directions on the screen. Refer to the following table for information on the choices on this menu.

Host Adapter SCSI ID
Select this choice to change the SCSI ID of the SCSI-2 controller from its default value of 7.
SCSI Parity Checking
Select this choice to enable or disable SCSI-2 adapter parity checking. The default value is Enabled .
Host Adapter SCSI Termination
Select this choice to configure SCSI-2 controller termination. The default value is Low On / High On .
SCSI Device Configuration
Select this choice to configure SCSI device parameters. Before you can make updates, you must know the ID of the device whose parameters you want to configure.
Advanced Configuration Options
Select this choice to view or change the settings for advanced configuration options. These options include setting the SCSI ID scanning order, and enabling support for a startable CD-ROM and for Int13Extensions.

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.