 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Power Management Features (2618)
Power Management Features
Press Fn + F1 to select the Configuration Utility.
The Power Management Features can be accessed from this menu.
Press F1 for additional online help.
Before using the power saving features, be sure to read and observe the
following precautions:
- If you enter Suspend mode with a diskette inserted in
the diskette drive, the same diskette must be installed in the drive
before attempting to resume normal operation.
- If you enter Suspend mode with a PCMCIA
card inserted in
the PCMCIA slot, the same PCMCIA card must be installed in the slot
before attempting to resume normal operation.
- If the computer is connected to a Local Area Network (LAN) that
periodically polls for station activity, the LAN-connection might be
terminated while the computer is in Suspend mode. Any further
attempt to access the network results in a brief delay and the computer
appears to hang (up to 1 minute, depending on the network). After the
delay, an error is displayed. Follow the instructions on the screen to
restore normal operation.
- Any software program that was running over the LAN is not re-entered
when you resume normal operation from Suspend mode.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.