Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Testing the Backup Battery (8554)



Testing the Backup Battery
  1.  Remove the keyboard and the top cover.
  2.  Disconnect the battery connector from the system board.
  3.  Measure the voltage of the backup battery.

 

Wire Voltage (Vdc)
Red +2.5 to +3.7
Black Ground


If the voltage is correct, replace the system board. If it is not, the backup battery is discharged by a short circuit or is defective.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.