IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Installed Devices List

If an adapter or device is missing from the installed Devices list and you are able to add it to the list, do so and continue with the diagnostic tests.

If an adapter or device is missing from the installed devices list and you cannot add it to the list, you might have one of the following conditions:

•  The diagnostic code for the missing device is not on  your Advanced Diagnostic diskette.
•  The missing device is a 5.25 Inch External Diskette  Drive Adapter, or another unrecognizable adapter.
•  The missing device is defective.
•  The bus adapter is defective.
•  The adapter or device is not an IBM product.

If the number of drives installed in the computer differs from the number shown in the installed devices list, an error can occur during diagnostics tests. Restart the computer and correct the drive information in the Set Configuration menu before running the diagnostic tests.

 +---- Warning ----------------------------------------+
 | For some models, a customized setup configuration   |
 | (other than default setting) might exist on the     |
 | computer you are servicing. Running Automatic       |
 | Configuration can alter those settings. Note the    |
 | current configuration settings (using the View      |
 | Configuration option) and verify that the setting   |
 | are in place when service is complete.              |
 +-----------------------------------------------------+

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.