Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Connecting External Options (Netfinity 7000-M10 - Type 8680)



Connecting External Options

Before you begin:


Connecting External SCSI Devices.

You can attach a SCSI storage expansion enclosure to the server.


Cabling Requirements: If you plan to install external SCSI devices, you must order additional SCSI cables.
These cables must have the proper connectors for the SCSI external connector and the external devices.

Refer to the information provided with the adapter to determine the number of internal and external connectors, channels, and SCSI devices that the adapter supports.

For information about the maximum length of SCSI cable between the terminated ends of the cable, see ANSI SCSI Standards:



Adhering to these standards ensures that the server operates properly.


Setting SCSI IDs for External Devices: Each SCSI device that is connected to a SCSI controller must have a unique SCSI ID, so that the SCSI controller can identify the devices and ensure that different devices do not attempt to transfer data at the same time. SCSI devices that are connected to different SCSI controllers can have duplicate SCSI IDs. Refer to 'SCSI IDs' and to the instructions that come with the SCSI devices for more information about setting a SCSI ID.


Installing External Devices: To attach an external device:

  1.  Run the shutdown procedure for the operating system.
     Turn off the server and all attached devices.
  2.  Follow the instructions that come with the option to prepare it for installation  and to connect it to the server.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.