Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

System Board Removal/Replacement



System Board Removal/Replacement

Before you begin


  Attention



To remove the system board, do the following:
To replace the system, reverse the removal procedure.
  1.  Remove the side cover, card support bracket and retainer clip, see 'Option Installation'.
  2.  Remove the rear fan assembly, see 'Rear Fan Assembly Removal'.
     
  3.  Release the system board back-plate release latch -1-.
  4.  Slide the system board and back plate toward the front of the system -2- and lift the system board and  back-plate -3- out of the server.
  5.  Disconnect all cables attached to the system board.
     
  6.  Remove the system board mounting screws to separate the system board from the back-plate.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.