Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Power Supplies



Power Supplies

The Netfinity server is shipped with a 350-watt power supply that provides redundant power through the use of two internal power modules.
If the server load does not exceed 175 watts, and a problem occurs with one of the power modules in the power supply, the other module takes over the load.
For power loads above 175 watts, you can install a second, optional, power supply to provide redundant power for the server. The second power supply contains one 175-watt power module.
With the optional second power supply installed, if a problem occurs with any of the power modules, the remaining two power modules supply the needed 350 watts of power.

The LEDs on the back of each power supply indicate the status of each of the power modules.
If an LED is not on, there is a problem with the power supply module, and the power supply must be replaced.


If you want to install or remove any other options, do so now. Otherwise, go to 'Completing the Installation'.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.