Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Link Status Lights on the Adapter



Link Status Lights on the Adapter

If a fault occurs that prevents the operation of a particular link, the link status lights of the various parts of the complete link show that the error has occurred.

You can find the failing link by looking for the flashing green status light at each end of the affected link. Some configurations might have other indicators along the link (for example, SSA connector cards) to help with FRU isolation.

The meanings of the disk drive and adapter lights are summarized here.
Status of Light    Meaning
  
Off    Both SSA links are inactive.
  
Permanently on    Both SSA links are active.
  
Slow flash    Only one SSA link is active.
(2sec.-on, 2sec. off)


If you need more information about the lights, see:


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.