Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Defining a Hot Spare



Defining a Hot Spare

To define a disk drive as a hot spare:
  1.  From the Main Menu screen, select SSA
  2.  The SSA Adapter List window opens:

     
     Select the primary adapter to which the disk drive that is to be  the hot spare is attached. The hot spare can only be used by arrays defined on that adapter.
  3.  The Adapter Menu window opens:

     
     Select Hot-spare disks.

  4.  A list of the hot spare disk drives that are controlled by the adapter is displayed.

    Note: The list might not contain any hot spares.

     
     Press Insert to add a new hot spare disk drive.

  5.  A list of candidate disk drives is displayed:

     
  6.  Highlight the entry for the disk drive that is to be the hot spare.
     (You can identify the disk drive by putting the cursor on its  Unique ID in this list and pressing F9. This causes a light on the disk drive to flash.
     Pressing FlO stops the light flashing.)
     Press Enter to define this disk drive as a hot spare.

     The previous window is displayed with the new hot-spare added to the list.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.