 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Restoring the Disk-Array Configuration
Restoring the Disk-Array Configuration
To restore the disk-array configuration information for the
ServeRAID controller, use the &raiddk. and an up-to-date
disk-array configuration backup diskette.
Dynamic changes in the configuration of the disk arrays
occur due to hot-spare drive replacement or other drive
maintenance activity. Because of this, the configuration
backup information on the diskette might be different from
the information stored in NVRAM for the ServeRAID
controller. Therefore, it is important that you back up the
disk-array configuration information frequently, to keep the
backup information on the diskette current.
To restore the ServeRAID configuration information:
- Start the ServeRAID Configuration program (see
'Starting the ServeRAID Configuration Program').
- Select Advanced Functions from the Main Menu,
then, press Enter.
- Select Restore/Convert Saved Configuration from
the next menu, then, press Enter.
- Insert the Disk-Array Configuration Backup diskette
into the diskette drive, then, press Enter.
- A list of backup file names appears. Use the Up
Arrow (
) or Down Arrow ( 
) key to select the file
name that you want to restore, then, press Enter.
- The Confirm pop-up window appears.
Select Yes to restore the configuration information, or
select No to return to the previous menu, then, press
Enter.
- Press Esc to return to the Main Menu.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.