Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

OS/2 Installation



OS/2 Installation

To start the Service Processor Manager installation program on a system that is running OS/2:
  1.  Start the computer with the OS/2 operating system.
  2.  Open an OS/2 full-screen or OS/2 window session.
  3.  Place the Service Processor Manager for OS/2 or NetWare  Installation Diskette into your system's diskette drive.
  4.  Make the diskette drive the active drive.
     For example, if the diskette drive is drive letter A, type A: at the command prompt and then press Enter.
  5.  Make the OS/2 directory on the diskette the active directory.

      Type
      CD OS2
      and then press Enter.

  6.  Start the installation program.

      Type
      INSTALL
      and then press Enter.



To continue the installation, see 'Installing Service Processor Manager'.

Note: For additional information, review the README file on the Advanced System Management for OS/2 or NetWare Installation Diskette. 


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.