Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Hot-Swap Power Supplies (Netfinity 7000 - 8651)



Hot-Swap Power Supplies
 

Hot-Swap Power Supplies: The server comes with two hot-swap power supplies installed. You can install a third hot-swap power supply to provide redundant power. (See 'Hot-Swap Power Supply Installation' for instructions.)
Power Switch: This switch turns the power supply on and off.
  Do not remove or install a power supply without first turning the Power switch on the power supply to the Off position.


AC and DC Power Lights These green lights provide status information about the power supply.

AC Power
Light
DC Power
Light
Description
On On The power supply is on and operating correctly.
On Off Either the Power On/Off button is in the Off
position (the DC Power lights on all the power
supplies are off) or this power supply has failed
(the DC Power light on at least one of the power
supplies is on).
Off Off The server is not connected to a working electrical
outlet.


NOTE: To ensure that the power supply is operational. both lights must be on. Also check the power up sequence, see 'Power Up Sequence'.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.