 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Configure/View Host Adapter Settings (Netfinity 7000 - 8651)
Configure/View Host Adapter Settings
To view or change the SCSI controller settings, select
Configure View Host Adapter Settings and follow the
directions on the screen. This menu has the following
selections:
- Host Adapter SCSI ID
Select this choice to change the SCSI ID of the SCSI
controller from its default value of 7.
- SCSI Parity Checking
The default value is Enabled. Do not change this value.
- Host Adapter SCSI Termination
Select this choice to configure SCSI controller
termination. The default value is Low On/High On.
- Boot Device Configuration
Select this choice to configure startable device
parameters. Before you can make updates, you must
know the ID of the device whose parameters you
want to configure.
- SCSI Device Configuration
Select this choice to configure SCSI device
parameters. Before you can make updates, you must
know the ID of the device whose parameters you
want to configure.
- Advanced Configuration Options
Select this choice to view or change the settings for
advanced configuration options. These options
include enabling support for large hard disk drives
and drives with UltraSCSI speed.
To reset the host adapter default values, press F6 and
follow the directions on the screen.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.