Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Pentium® II - Processor Board (8640-Pxx)



Pentium® II - Processor Board
 
  1.  Primary VRM Connector
  2.  Primary VRM
  3.  Secondary VRM Connector
  4.  Air Buffle
  5.  Terminator card in Secondary Microprocessor Connector
  6.  Secondary Microprocessor Bracket (goal-post)
  7.  Primary Microprocessor Bracket (goal-post)
  8.  Primary Microprocessor
  9.  Dual-inline memory module (DIMM) in memory-module connector 1


  If you are installing an additional microprocessor, remove the terminator card (5) from the secondary microprocessor connector.

The second microprocessor installed, becomes the startup (BOOT) microprocessor.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.