Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Controls and Indicators (Server-330)



Controls and Indicators

The most commonly used controls are on the front of the server.
 

Controls Indicators Descriptions

CD-ROM Eject Button  Push this button to release the CD from the CD-ROM drive.

Diskette Eject Button  Push this button to release the CD from the CD-ROM drive.

Power-On Light  This green LED lights when you power-on the server by pressing the power switch, and when the server powers on in the Unattended mode.

Power Switch  Use this switch to power-on the server manually, or return the server to Standby mode . The automatic restart feature, which enables the server to restart following a momentary power loss, means that the server is never completely powered-off.

Do not set the server to the Standby mode if any of the drive In-Use lights are on. This might damage the information stored on a hard disk or diskette.

You can configure the server to start at a specified date and time, or when it receives a signal from either serial port. (For more information on setting Unattended startup, see Alarm/Wakeup Settings

To toggle the server between Attended mode and Standby mode, press and release the power switch.

Diskette-Drive In-Use Light This light comes on when the drive is accessing a diskette.

CD-ROM Drive In-Use Light: This light comes on when the CD-ROM drive is accessed.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.