 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Fan Checkout (TP 560Z - 2640)
Fan Checkout
To check the fan, do the following:
- Start Easy-Setup.
- Click on Test. The fan will start so you can check the air turbulance at the fan louver.
- Press Ctrl+A to enter the advanced diagnostic mode. The ThinkPad FRU Connections window
appears. If the fan connector is not connected, the Fan not connected message appears.
- Click on Exit. The keyboard layout appears on the screen.
- Click on Exit again.
- Click on System Board then press Enter to run the test.
Follow the description in the window. If the test detects a fan problem, replace it.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.