|
|
|
| Symptom / Error | FRU / Action in Sequence |
|---|---|
| Continuous beeps. | System Board |
| One beep and a blank, | 1. Reseat the LCD connector. |
| unreadable, or flashing LCD. | 2. LCD Assembly |
| 3. System Board | |
| One beep, and the message | 1. Boot device |
| 'Unable to access boot source'. | 2. System Board |
| One long beep and two short beeps, | 1. System Board |
| and a blank or unreadable LCD. | 2. LCD assembly |
| One long beep followed by | Connect the AC Adapter or install |
| four short beeps each time | a fully charged battery. |
| the power switch is operated. | |
| (System cannot power on | |
| doe to low battery voltage.) | |
| One beep every second. | Connect the AC Adapter or install |
| (System is shutting down | a fully charged battery (Allow |
| due to low battery voltage.) | the system to complete shutdown |
| before changing the battery) | |
| Two short beeps with error codes. | POST error. See 'Numeric Error Codes' |
| Two short beeps with blank screen. | System Board |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.