 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Universal Serial Bus (USB) Test (TP 600/600E - 2645)
Universal Serial Bus (USB) Test
At the advanced diagnostic window, connect the USB parallel test cable (P/N 05K2580) to the computer, as shown.
Click on USB-1 icon to run the test. Follow the instructions on the screen.
OK appears if the test passed, but three lines of error codes appear if the test failed.
The defective FRU must be the system board.
Use the cable number 2 for the USB port on a port replicator. Click on USB-2 icon.
If you want to test the USB ports on a docking station, connect both cables (number 1 and 2) to the USB ports and click on
USB-3 and USB-4 icons.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.