Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Printing and Displaying Error Logs



Printing and Displaying Error Logs

Diagnostics errors are printed on the printer that is attached to the parallel port when the error is detected. The error is also logged in the system memory.

Use the following procedure to display the errors:
  1.  End the test, if it is running.
  2.  Press Ctrl+A to  enter the advanced diagnostics.
  3.  Press Ctrl+E.
  4.  The error log appears.
  5.  To exit the screen, select Cancel or press Esc.


The error log is not saved when system power is turned off.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.