==========================================
Date            Version         Description
==========================================
10-11-99        1.04(CKS:4837H) Support VIA686A CF version
                                AC97/MC97 Codec ID reported on 2c-2F
                                if CF version detected
9-13-99         1.03(CKS:78FDH) AC97 audio/modem auto detection
                                Setup Menu changed
                                OnChip Sound (Enable)-->AC97 Audio(Auto)
                                OnChip Modem (Enable)-->AC97 Modem(Auto)
9-10-99         1.02(CKS:6035H) Fix Ac97 Modem can not be disabled
8-27-99         1.02(CKS:9B8FH) audio legacy default disable
                                Disable L2 Cahche CLk in post 63S
                                MC97 default enable
8-24-99         1.02(CKS:3A99H) Fix Power on by RTC Alarm
                                Fix AMR MC97 initial Error
                                Fix Boot Beep through AC97error
                                Fix MIDI test fail
8-10-99         1.01(CKS:F881H) Fix 8/4/99 BIOS WIN982E/DEVICE MANAger
                                LPT/COM1/COM2 not correct
                                Add SW SMI in DSDT.ASX for F1 state
                                enable SW/SMI in PMUPOST.asm
8-04-99         1.01(CKS:211DH) Bug fixed when WIN982E+ACPI+SERIOUS MOUSE
                                Standby and SERIOUS MOUSE CAN'T WAKEUP AND WORK
                                (move superio.asl up before _PTS in DSDT.ASX)
8-03-99         1.01            Bug fixed when WIN982E+ACPI+USBKEY/MOUSE enable
                                and no USB device connect(must enable USB SMI
                                before CT_USB_FINAL_INIT)
8-02-99         1.01            Release BIOS v1.01 CKS:0808H
7-29-99                         disable USB SMI when there is no USB KEYBOARD
                                plug in
7-28-99                         disable USB SMI from bios starting
7-27-99                         disable USB legacy smi when do memory testing
7-26-99                         DRAM Testing and Reboot fixed (Not yet 7-27-99)
7-21-99                         TNT/AGP hang fixed
                                Show 2 Serial Bus controller(USB) fixed
                                IRQ/VGA default enable (for TNT/AGP hang
                                when restart from MS-DOS)
                                SpreadSpectrum default to 0.25%
7-20b-99                        ADD SYMBIOS and ANTVIRUS
                                TNT/AGP hang not fixed
7-20-99                         Use source code 062599
                                add 'Not SIMENS SDRAM' in Bios.cfg
                                to fix TNT/AGP hang
                                CMOS REG 64,65,66 used by PASSWORD
                                USE CMOS REG 41h
                                bios ver 1.01 beta release
7-19-99                         relase IRQ12 if no PS2 mouse plug in (superio.sio
7-15-99                         Fix boot from A:DOS622, HDD was on 2nd Channel
                                and Drive C was gone (G_RAM.INC mis coding)
                                Fix 100Mhz Clock setup value can not save
                                Fix SCO boot From A: coding error (or di,di)
7-09-99         1.0             Bios ver 1.00
                                enable DMA66 for QUANTUM HDD (because no use)
7-08-99                         set North bridge R73=0x0c,R74=0x0e,R75=0x81
                                for audio initial fail bug
7-07-99                         USB kb/mouse wake up in win98 2E/APM fixed
7-06-99                         Move SCSI bios item to chipset
                                to fix SLOT#/IRQ# display overbondary

7-01-99                         Take Off "M" in HDD size item (SETUP)
                                Fix DIMM/BANK# display incorrect (CHIPPOST)
                                Fix DMA66 coding error
                                Move SYMBIOS setup from PNP/PCI to BIOS setup
6-30-99                         VGAIRQ Enable/Disbale (setup)
                                When COM2 Disable and show IR standard (setup)
6-29-99                         SCO Boot From A: fixed
                                disbale DMA66 for QUANTUM HDD
                                add SLOT#/IRQ# setting
6-28-99                         AMR IRQ not assigned fixed
6-25-99                         power off/apm donot specify chipset_softoff
                                wakeup/com mouse is the same problem
                                alarm/F1 fixed
                                clockgen in 2x table fixed
                                SB D4 is disable to avoid win98 reboot hang
                                if no driver installed

6-22-99                         modify dsdt.asx
                                suspend led blinking in 1Hz
6-22-99         d               modify dsdt.asx
                                to program GPO3 to LOW
                                after wakup
6-21-99         c               modify 686_lpt.asx
                                to fix LPT/ECP+EPP
                                IOPORT 3BCH not include
                                in HCT/PC9x

                b               USB MOUSE wakup from
                                standby was dependent by
                                USB MOUSE (iMac Mouse work)
                                Porting M4 to P5M3