It is necessary to read the following items.
============================================

1. If using (Ultra)DMA HDD, please install "VIA bus master IDE driver" and    
   after restart the system, please install "VIA bus master IDE driver" again, 
   but select "Enable/Disable (Ultra)DMA" item to finish the installation.
   
2. Before installing onchip VGA(Trident Display) driver, you must install the 
   VIA AGP driver. 
   
3. Win98 Installation
   a. Go into BIOS setup and enable USB support
   b. Install Win98 on your system
   c. Install the VIA IrQ routing miniport driver
   d. Install the VIA AGP driver
   e. Install onchip VGA(Trident Display) driver

4. To install onchip VGA(Trident Display) driver in Win95, use the following
   installation procedure.

   a. Install Windows 95 (OSR2 v2.1 , 1212 or 1214 later version, 
      USBSUPP support)
   b. Remove "PCI Universal Serial Bus" in Control Panel\System
      \Device Manager\Other Devices and then Install USB dirver.
   c. Install VIA AGP VXD Driver
   d. Install on chip VGA(Trident Display) Driver.