************************************************************
****             Quick Flash Instructions               ****
************************************************************

 Unzip file, copy the "ROM" file to a diskette in "A" drive.            
               (Diskette does not have to be bootable).

 Make sure your using the on board floppy controller.

 With system powered off and diskette with "ROM" file in "A" drive.

 Hold down on the "CTRL & HOME" keys and then power on system.

 There will be no video and notice floppy drive being accessed.

 You should hear 1 beep let go of keys.

 Then you will hear 2 beeps and then 3 beeps.

 System should reset and notice new BIOS release date at top of screen.

 Enter BIOS SETUP run the OPTIMAL SETINGS OPTION.

 Change BIOS SETTINGS for your configuration.

************************** WARNING *************************
If you are using the "password" option in the BIOS, you must DISABLE the
Password BEFORE you flashes the BIOS. This BIOS uses a new core and saves the 
Password at a different location.

If you flash the BIOS without disabling the password, you may not be able
To get into the setup. If this happens, you must drain the CMOS first.