M741lmrt
        ATX
        sis 620
        sis 5595 b2/b3
        Onboard /LAN (PCnet) 
                /Sound (CMI 8738)
                /Modem (CMI 8738 f1)
        
BIOS Release 
        file name       :990505S.rom
        check sum       :966CH
        Release date    :1999/5/5
        ECN             :SNG-990051       

        1. Release BIOS
        2. VGA BIOS :V102.51

BIOS Release
        File name       :990601S.ROM
        Check sum       :9AE5H
        Release date    :1999/6/1
        ECN             :

        1. support SiS 5595B3/5595B2 chipset
        2. VGA BIOS :V102.51
        3. support PRINT Port out BIOS POST (debug) CODE.

 
file name       :990702S.rom
Check sum       :B50EH
Release date    :1999/7/02
ECN             :SNG-990060

        1.chang coms default .
           assing IRQ for VGA :" No "   CHANG TO  "Yes"


file name       :990707S.rom
Check sum       :901CH
Release date    :1999/7/07
ECN             :SNG-9900xx

        1.remove gpio pin reset function (5595 b3 chipset only).

file name       :990914.rom
Check sum       :274Dh
Release date    :1999/9/28
ECN             :SNG-990101

        1.Changing the SiS 5595 B2 chipset with H/W reset issue.


BIOS Release 
        file name       :991025S.rom
        check sum       :3B6Bh
        Release date    :1999/11/2
        ECN             :SNG-990111

        1. There is random code behind the CPU temperature of 
           "Hardware Monitor" in CMOS setup menu.

BIOS Release 
        file name       :2K0331S.ROM
        check sum       :FF7Bh
        Release date    :03/31/2000
        ECN             :SNG-2K0036

        1. Add AT49F002T AND SST39SF020 AND ASD49F002T AND PMC29F002T Flash
        2. Add CPU ID FILES S1067103.PDB , S1067210.PDB AND S106730e.PDB
        3.36GB Hard Disk support
        4.USB SUPPORT USB.ASM AND usbkbd.asm
        5.Brand ID and new Intel CPU naming.

BIOS Release 
        file name       :2K0620S.ROM
        check sum       :E2BAh
        Release date    :06/20/2000
        ECN             :SNG-2K0061

        1. Support OEM Logo function
        2. Support BIOSLOCK function
        3. Support Hyundai Hy29f002T flash parts
        4. Support SST 39VF020 flash parts
        5. Support Celeron CPU from 566 to 700MHz
	6. Support CyrixIII CPU

BIOS Release 
        file name       :2K0810S.ROM
        check sum       :9EBBh
        Release date    :08/10/2000
        ECN             :SNG-2K0099

        1.Setting "USB Function" to "Enabled".
	2.Enhanced ALPS USB K/B function.
	3.Fixed that using Cyrix III CPU and enabling the USB function
	  caused system hung up.  

BIOS Release 
        file name       :2K1011S.ROM
        check sum       :F003h
        Release date    :2000/10/11
        ECN             :SNG-2K0150

	1.Fixed that LPT port not uses default IRQ 7.
	2.Updated Micro-code (686).

BIOS Release 
        file name       :2K1103S.ROM
        check sum       :0B66h
        Release date    :2000/11/03
        ECN             :SNG-2K0177

	1.Support ATA100's PCI card.
	2.Changing the suspend sequence:
	   a)Standby mode: Turning off Monitor.
	   b)Suspend mode: Turning off HDD motor.
	3.Fixed that display message = APM,SMI in Boot Screen when choosing
	  POWER MANAGEMENT = "Disabled","APM","ACPI" or "APM/ACPI" in CMOS
	  Setup Menu. 

BIOS Release 
        file name       :2K1110S.ROM
        check sum       :160Dh
        Release date    :2000/11/10
        ECN             :SNG-2K0182

	1.Fixed that PS2 mouse seems to be busy in Win98 
          ACPI mode (SiS 5595 B2 Version).

BIOS Release 
        file name       :2K1120S.ROM
        check sum       :5BDEh
        Release date    :2000/11/20
        ECN             :SNG-2K0188

	1.Fixed that RTC fail when using "CHECKIT 5" utility.

BIOS Release 
        file name       :2K1220S.ROM
        check sum       :BE49h
        Release date    :2000/12/20
        ECN             :SNG-2K0257

	1.Fixing that using DAA module can't wake up from standby mode.
	2.Fixing that if pressed "TAB" key during POST , causing system hung up
	  between OME LOGO screen and BIOS normal boot screen.
	3.Correcting that Celeron CPU 766 showed 800.
	4.Fixing that installing Win98 system will be set to ACPI mode after 
	  user selects "LOAD Optimal value" and "Save CMOS exit" in CMOS Setup Menu.