====================================================================== Micronics Helios BIOS ====================================================================== Release Notes ----------------- This is the BIOS version 1.19D for the Micronics Helios system board. BIOS Flash Installation Notes ------------------ The following steps are recommended to properly update the Micronics Helios system board with this updated BIOS ROM. 1. Create a DOS system boot disk. 2. Copy the contents of this BIOS set to the DOS system boot disk. 3. Boot the system from this disk. 4. Type "phlash /mode=3 xxx.ROM" where xxx is the name of the ROM file. 5. After the flash process has completed, reboot the system. 6. System BIOS update has been completed. Problems Addressed ------------------ Intel PII 450MHz. Processor Support Intel PII Celeron 333MHz. Processor Support Known Limitations ------------------ None ======================================================================= Diamond Multimedia Systems, Inc. (c) 1993-98, All Rights Reserved =======================================================================