***************************************************************************** * * * VIA PCI 10/100Mb Fast Ethernet Adapter * * * * NDIS3 Driver for Windows NT 3.51 * * * * v2.61 Oct. 2000 * * * ***************************************************************************** Introduction: ============= This document shows you how to setup the driver and how to use the enhanced functions by setting the custom keywords. Contents of the Subdirectory: ============================= FETND3.SYS The NDIS3 driver for Windows NT. FETNDH.HLP The help file. OEMSETUP.INF The setup information file. WINNT351.TXT This file. Installation: ============= Before starting with the installation process, make sure that the adapter is properly installed and configured. 1. Open "Control Panel" -> "Networks", and choose the "Add Adapter" button. The Add Noetwork Adapter dialog box appears. Select " Requires disk from manufacturer" in the list of Network Adapters, and then press . 2. Insert the driver diskette into your floppy drive, and specify the path of the driver in the diskette(i.e. A:\WINNT351) if necessary. 3. Select "PCI 10/100Mb Fast Ethernet Adapter", and start to copy the driver files to your system. 4. After all the driver files have been copied to your system, a property dialog box appears in the screen. You can enable the special properties if you want to. 5. When the driver installation is completed, restart your PC.