----- SP97-(V) -----



sp970102.zip  SP97-(V) (SiS 5598 chipset) M/B, PnP BIOS ver. 0102. 09/25/1997

              1. First Release.



s97v0103.zip  SP97-(V) (SiS 5598 chipset) BIOS ver. 0103.

              1. Change the VGA firmware form 1.04a to 1.04e, it disable the register 

                 about VGA chipset delay transaction to fix the capture card(Bt848) 

                 display abnormal. 

              2. Fix [IBM-DHEA-38450] 8.3G size detection error.       

              3. Revise the ATA/ATAPI auto-detect alogrithm.

              4. Fix can't format 1.44MB diskette in LS120 drive when dirve A is 

                 1.44MB standard Floppy and drive B is LS120.

              5. Fix HDD Display size wrong in system config table if Partition table 

                 Is invalid.



s97v0106.zip  SP97-(V) (SiS 5598 chipset) BIOS ver.0106.

              1. Fix Automatic Power Up failure under some conditions 

              2. Fix for ESS Maestro-1 PCI Audio card failed with Win95 

              3. Fix SIO 16-bit decode support error. 

              4. Change '16-bit ISA Wait state' item to 'ROM Cycle Wait States'.

                 Options become '4-Wait' & '1-Wait'.              

              5. Revise PCI IRQ Routing table support for PC97 HCT test 

              6. Fix 3COM 3C905 legacy expansion ROM executed redundantly. 

              7. Update SiS Vga BIOS to v1.7 for fixing Win95/POLISH setup problem. 

              8. Sea MA deiving strength to 6mA. 

              9. Add Wake On LAN support. 

             10. Fix NSTL year 2000 test failed. 

             11. Set Maximum speed for Intel series CPU to 233MHz. 

             12. Fix some bootable CD diskette boot failure. 

             13. Add new USB keyboard spec support. 







s97v0108.zip  SP97-(V) (SiS 5598 chipset) BIOS ver. 0108, 06/11/1998

              1. Fix 3COM 3C905B WOL card failed with D3-cold support.

              2. Fix system can not be turned off when Intel 82558 card plugged.

              3. Fix Win95 OSR2.1 did not respond after standby event if USB

                 supplement driver installed.

              4. Add onboard VGA BIOS first option.

              5. Add Wake-On-LAN Enable/Disable control.









			 ----- SiS 5598 (SP97-V) -----



sp97nt35.zip  SP97-V M/B, SiS 5598 VGA drivers for Windows NT 3.51, Rev. 1.10

sp97vnt4.zip  SP97-V M/B, SiS 5598 VGA drivers for Windows NT 4.0, Rev. 1.10

sp97cw95.zip  SiS 5598 VGA driver for Windows 95, (ASUS Support CD Rev. 2.00 in Chinese, Japanese, and Korean)

sp97ew95.zip  SiS 5598 VGA driver for Windows 95, (ASUS Support CD Rev. 2.00 in English, and 10 Major European Languages) 

sp97cw31.zip  SP97-V M/B, SiS 5598 VGA drivers for Windows 3.1, Rev. 1.10 (CJK version)

sp97ew31.zip  SP97-V M/B, SiS 5598 VGA drivers for Windows 3.1, Rev. 1.10 (Western English version)



         ----- SiS 5513/5582/5598 IDE controller -----



side121.zip   SiS 5513 IDE drivers Rev. 1.21E, for P/I-P55SP4, P/I-P55SP3AV, P/I-P55SP4V, SP97-(V)(XV).





------- Manual ---------

sp97v-102.pdf	PCB Rev.1.02/English

sp97v-104.pdf	PCB Rev.1.04/English

t_sp97-v-103.pdf		Chinese

t_sp97-v-104.pdf		Chinese